M919UVUFNB4 T-Mobile Galaxy S4 M919 4.4.2 Kitkat Update OTA Firmware

T-Mobile’s Galaxy S4 (SGH-M919) 4.4.2 KitKat update is now available for grab. The 4.4.2 Kitkat update now comes in firmware build number M919UVUFNB4. It is now live and it can be downloaded via OTA (over-the-air) or by using Samsung Kies. But for those who are running a rooted device from previous 4.3 M919UVUEMK2 update, or any ROMs and might change your mind and wants that sweet KitKat update now, this is for you fellas since you cannot get this update as simple as it can be unlike those who are still running on 100% pure official firmware.

The Android 4.4.2 Kitkat update build M919UVUFNB4, features some significant changes already found on Galaxy Note 3’s KitKat update. This include the new white status bar icons, a restyled navigation, improved UI, the camera shortcut in the lock screen and among other KitKat goodies. Some features like the Music Album Art which was addressed by Samsung from the official changelog has nowhere to be found and seems Samsung has pulled-out the Art project with Touchwiz. The Google wallet seems to work for tap to pay, just then try to check out the wallet app set-up in the settings.

T-Mobile Galaxy S4 Kitkat update changelog

The stock firmware below is only for those who did not get this update through ‘OTA’ over-the-air or even Kies and had faced issues like “Software Update Failed” or “This device is not supported with kies” and any similar errors.  So again, if you want to have the 4.4.2 KitKat update installed on your Galaxy S4 just simply grab the 4.4.2 M919UVUFNB4   stock firmware below, for this is your other last resort.   One more thing, the 4.4.2 update now equipped with a secured bootloader which similarly found on 4.3 updates, some circumstances is that you cannot revert back to the older software update version, for this breaks the bootloader image once gets re-written. So make sure to be aware with that if you are planning to install any ROMs that still based on 4.3 , or 4.2.2. If you are also rooted then you’ll lose root once the 4.4.2  installation has made, that’s because official firmwares wipes-out any modification you have installed in your device.

Upgrade T-Mobile Galaxy S4 SGH-M919 to Official Android 4.4.2 KitKat M919UVUFNB4 (OTA Firmware via Stock Recovery and Odin method)

Disclaimer: This method is used by Android developers and advanced users only. If ever this is your first time heard about this procedure, please make a careful research first before proceeding. We shall not be held any responsibility if anything happens to your device from using this guide. Proceed at your own risk!

Warning: This stock ROM is only compatible for Samsung Galaxy S4  with SGH-M919 (T-Mobile)  specific model only. Do not ever try to use this firmware on other Samsung Galaxy S4 variants.

FAQS:
Q: Will I lose root once using this method?
A: Yes, this will restore your device into official firmware.
Q: Can I install root again once upgraded to this version?
A: Yes, this firmware build can be rooted, but be aware about the new KNOX security platform hidden inside the system that  completely voids the warranty of your device once gets tripped by means of rooting or installing any custom recovery. This sets “KNOX warranty Void: 0×1 from 0×0″ (You can see this when you set your device in download mode). This cannot be reset by any hacking method except by Samsung service personnel using a special reset tool of-course and or changing the entire PCB board.

Download the original M919UVUFNB4 Stock Firmware:
Device Name: Samsung Galaxy S 4
Model number: SGH-M919
Country: U.S.A.
Carrier: T-Mobile
Android version: 4.4.2 (KitKat)
Baseband version: M919UVUFNB4
Kernel Version:  3.4.0-540242
Build Number:  KOT49H.M919UVUFNB4
CSC: M919TMBFNB4
Build Date: 14, February 2014
Release Date: 10, March 2014

M919UVUFNB4 T-Mobile Galaxy S4 M919 KitKat update

Stock OTA Firmware M919UVUFNB4: Download [thank’s to ShinySide at XDA-Developers]
Stock Odin Firmware M919UVUFNB4: Download

Prerequisites:

Before you proceed prepare these necessary things as follows so you’ll not screw-up your phone:
– If your phone is currently rooted or runs with custom ROM, including custom recovery and modified kernel and any other unsigned system images. You must have reverted back your Galaxy S4 to the official 4.3 M919UVUFNB4 firmware,  unless or otherwise you’ll only get “Authentication” error or failure upon installation.
– Create a back-up all your personal data, like: Contacts, Messages, Applications, Pictures and Videos, so that you will not lost it just in-case something might went wrong after the update.
– Make sure that your Galaxy S4 battery is fully re-charge to ensure stability and to get rid pf power failure issues while updating.
– Close all softwares, such as KIES suite, Antivirus, firewalls, to prevent the possible conflicts.
– Prepare a personal computer or laptop with Windows OS.

How to get the OTA update M919UVUFNB4 for Rooted Galaxy S4

You must unroot or return back your T-Mobile Galaxy S4 M919) to official Android 4.3 update build M919UVUEMK2, follow this guide here, – Install M919UVUEMK2 Android 4.3 firmware on T-Mo Galaxy S4 M919.
The stock firmware has been there for a while for those who have had root, custom ROM and recovery and wants to return back their Galaxy S4 to complete stock or official firmware. Once installed and completely returned to pure stock 4.3 you can then simply run the OTA update via Setting>>Device>>Check for update, to get the M919UVUFNB4 4.4.2 KitKat. You should then fine taking the OTA update from there. Below are the other resources to get the official 4.2.2 firmware.

Stock Recovery Flashing Procedures:

– Your device must have no root, no custom recoveries for it will not worked with any custom recoveries.
– Ensure that your Galaxy S4 (GT-M919) fully runs with Original 4.3 M919UVUEMK2 firmware so that your phone got the stock recovery, this is importantly needed so you can flash the OTA update firmware file.
– Download the OTA file and then copy it to your SD card. You can rename the OTA update firmware to “update.zip” if you want.
– Reboot your Galaxy S4 in recovery mode. Hold down Volume Up+ Home+Power button.
– Once in recovery, scroll down and choose “Apply Update from SD card”.  Locate and select the update file then simply hit install.
– Wait ’til the flashing finishes,  it reboots a couple of times.

Odin Flashing Procedures:

Odin downloader –  Odin3_v3.09 
USB Driver – Drivers are here

1) Extract the downloaded firmware or stock ROM. Use winzip, 7zip,winrar or any decompressing program you have in your computer.
2) Run Odin Downloader v3.07 flasher program.
3) Just click on the PDA button then select and load the binary image.
‘M919UVUFNB4 _M919TMBFNB4_M919UVUFNB4_Home.tar.md5′
DO NOT check ‘Re-Partition’ option.
leave these checked: Auto Reboot and F.Reset Time checkboxes.
4) Reboot the Galaxy S4  into Download Mode: Turn it Off first. Now Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.
5) Connect USB data cable to Phone. The ID:COM box will highlight and turn to a bluish color when the phone is properly connected and already recognized with Odin.
6) Tick the ‘START’ button when all is set and ready to begin flashing.
7) DO NOT Interrupt, touch nor do anything when the phone is already in flashingprogress mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. (If you get failed errors, check the USB connection condition, repeat the whole process)
8.Wait until the phone completely reboots, then unplug it from PC.
Do factory reset again after flashing.
This is only optional just in-case you’ll experience bootloops and lag issues afterflashing.
Press and hold Volume Up+ Home+Power button, then select the Wipe Data/Factory Reset, to gain a fresh firmware installed.