Install G900FXXU1ANG2 Samsung Galaxy S5 SM-G900F 4.4.2 Firmware

Just another Android 4.4.2 firmware build G900FXXU1ANG2 for Samsung Galaxy S5 SM-G900F (Snapdragon). The G900FXXU1ANG2 4.4.2 update seen officially rolled out across by Samsung to almost all Samsung Galaxy S5 SM-G900F users all over the world. The update brings several improvements and security enhancement and it can be seen via over-the-air and or using Samsung Kies. For those who has root and modified Galaxy S5 and might want to restore back to the official firmware then you can manually install the original G900FXXU1ANG2 4.4.2 firmware, just read on below for the step by step guide.

Technical Details of G900FXXU1ANG2 4.4.2 Firmware:

G900FXXU1ANG2 Galaxy s5 firmwareDevice name: Samsung Galaxy S5
Model number: SM-G900F
Android version: 4.4.2
Baseband version: G900FXXU1ANG2
Kernel version: 3.4.0-2089850
Build number: KOT49H.G900FXXU1ANG2

Again, the G900FXXU1ANG2can be downloaded through Samsung Kies. Below are the official firmware build G900FXXU1ANG2 4.4.2 KitKat for advanced users that cannot update their devices beforehand as it was already modified and now wants to manually update.

Important Reminders before you install the G900FXXU1ANG2 4.4.2 Stock Firmware

Will this trip KNOX warranty void flag counter to 0×1?
Nup, this is an official and signed firmware from Samsung, so flashing official firmware will not trip KNOX.
My Samsung Galaxy S5 SM-G900F is rooted, will I lose root?
If your device is currently rooted you will lose root after flash, but you can still root it again if you want.

Disclaimer: Use of this method is solely at your own risk! Please proceed with precautions, for we will not take any responsibility if anything happens to your device by using this guide.

  • Make sure that your Samsung Galaxy S5 SM-G900F is fully charge.
  • Stock Firmware packages comes in two formats the ‘Full-Wipe’ (delete your stored data after flashing) and the ‘Non-Wipe’ (it doesn’t delete your phone’s stored data) but it is highly recommended to make a back up all important files stored from your phone’s internal memory – contacts, messages, etc. before flashing no-matter if it is Full-WIpe or Non-Wipe, just to be safe and ensure that your stored data are in safe if something went wrong during the flashing process.
  • Use a PC or laptop that runs in Windows OS, with a good and perfectly working USB serial port. Odin will not work on MAC OS.
  • Use the supplied USB cable for your Samsung Galaxy S5 SM-G900F.
  • Enable USB debugging from your phone’s settings – while if you are on 4.3 just hit Settings>>About Phone>> then scroll down to the build number and tap that number for around 7-times ’til the Developer option appear.
  • Ensure that KIES is closed and not running in the system tray! Kies and Odin are both created by Samsung but Kies will interrupt and doesn’t like Odin, it will block you from flashing.
  • Note: The Android 4.4.2 KitKat now comes with a new protected bootloader that might cause issues when you try to downgrade to the old software updates. This also applies if you are planning into rooting and installs any custom recovery and any unsigned firmware once you are on 4.4.2 KitKat, so please be aware with that.

Download the G900FXXU1ANG2 4.4.2 unbranded firmware:

Austria  – G900FXXU1ANG2_ATO – (download)
Germany  – G900FXXU1ANG2_DBT – (download)
Greece  – G900FXXU1ANG2_EUR – (download)
Luxembourg/Belgium – G900FXXU1ANG2_LUX – (download)
Poland – G900FXXU1ANG2_XEO – (download)
Romania  – G900FXXU1ANG2_ROM – (download)
Russia  – G900FXXU1ANG2_SER– (download)
South Africa  – G900FXXU1ANG2_XFN– (download)
Switzerland  – G900FXXU1ANG2_AUT – (download)
Sweden  – G900FXXU1ANG2_VDS – (download)
Saudi Arabia – G900FXXU1ANG2_KSA– (download)
United Kingdom  – G900FXXU1ANG2_BTU – (download)
United Arab Emirates  – G900FXXU1ANG2_XSG – (download)

The Tools:
Odin3.v3.09 find here
USB Driver find here

Install the Samsung Galaxy S5 SM-G900F USB driver

Install the USB Driver first to get rid of flashing failures. You may also need to extract the downloaded file which is packed in zip or rar files, so that you’ll get the tar.md5 file.

Run and Configure Odin

Run Odin downloader Odin3_v3.09 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘Phone Bootloader Update’ (only if your device runs on 4.3) , ‘AUTO-REBOOT’ and ‘F.RESET TIME’ checkboxes must be checked. Only the ‘RE-PARTITION’ is unchecked.

Reboot your Samsung Galaxy S5 SM-G900F into Download Mode

To reboot the Samsung Galaxy S5 SM-G900F into download mode , you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.

You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”

Connect your Phone to PC or Laptop

Once you already reboot the phone in download mode, simply connect the phone to your PC or laptop USB.
In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin. Your COM port number might be different from mine. If you do not see a COM port number then there’s something missing or wrong. You may read again from the top of this post.

Load the stock G900FXXU1ANG2 4.4.2 Android KitKat firmware file

The stock firmware is pack in a single .tar.md5 file only. Now, you need to just simply click on the AP button, then browse to the folder where the file you have previously extracted and then select and load it.

Start Flashing or Installing the stock firmware

Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock ROM.
Do not ever interrupt the phone while already in flashing progress, like disconnecting the cable or turning off the device. Just wait until it completely finish.

Wait until you see the PASS!! message

When the Stock Firmware installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing was already finish, and on the log box it says “All threads completed (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s about time to remove it from PC or laptop USB connection.

Confirm if you successfully installed the stock firmware

Confirm your fresh firmware installed by typing *#1234# or
Go to Settings>About Phone>Firmware info.

Possible errors that you may encountered, this is based on my own experience while flashing stock firmware on Samsung Android devices. These are just a few hints on how to resolved it.

Q: I got an error message that says “Set-up connection Failed” ?
A: 1. Check your USB connection from the phone to PC,
2. Connect to another PC USB port
3. Check and or try to another USB cable
4. Re-install the USB driver.
Q: Odin just suddenly stuck in the middle of nowhere while in flashing progress, it isn’t responding at all?
A: Check for possible program that might interrupt the process, like disabling the anti-virus and closing any running programs. Also try to use another computer or laptop,
Q: I experienced bootloop or the phone just stuck on Welcome Logo (phone always stop at bootanimation) and it won’t boot normally?
A: This eventually happens if your device came from custom firmware but you can fix it via recovery mode option, do this:
Boot in recovery mode
1. Press and hold Volume Up, Home and Power button.
2. Use volume keys to select, Up and Down and Power or Home key to select the option
3. Select Wipe Data/Factory Reset using the Home button.
4. Next select the Wipe Cache Partition
5. Lastly, select Reboot System Now to reboot your Samsung Galaxy S5 SM-G900F in Normal mode.

That’s it! If you found some interesting features, including bugs and other issues to this G900FXXU1ANG2 4.4.2 KitKat update, just drop it on our comment form below.