Install N900TUVUENK3 T-Mobile Galaxy Note 3 4.4.2 Stock Firmware

T-Mobile Samsung Galaxy Note 3 N900TUVUENK3 4.4.2 stock firmware. The N900TUVUENK3 features the Chinese language support and an update to the previous N900TUVUDNF9 4.4.2 update that was also brought the T-Mobile Free Inflight Texting.
The N900TUVUENK3 stock firmware below are only for those who might not been able to get the update, it’s either your Galaxy Note 3 has been running a modified firmware and or rooted. Once your Galaxy Note 3 has been modified you cannot get the update through OTA and it only gives you an error saying that your device has been modified. So therefore installing the stock firmware is the only way you can restore back or update your device to the official 4.4.2 N900TUVUDNK3. Just read on below for the step by step guide.

Technical details of the N900TUVUENK3 4.4.2 Firmware

Tmobile Galaxy Note 3 N900TUVUENK3 Firmware

 

Device Name: Samsung Galaxy Note3
Android Version: 4.4.2
Baseband Version: N900TUVUENK3
Kernel Version: 3.4.0 – 2587359
Build Number: KOT49H.N900TUVUENK3
AP: N900TUVUENK3
CSC: N900TTMBENK3
CP: N900TUVUENK3

Changelog of N900TUVUENK3

• Chinese language support

The stock firmware below is only for those who did not get this update thru ‘OTA’ over-the-air or even Kies and had faced issues like ” Your device has been modified”, “Software Update Failed” or “This device is not supported with kies” and any similar errors. So again, if you want to have the 4.4.2 KitKat update installed on your Galaxy Note 3 just simply grab the 4.4.2 N900TUVUENK3 stock firmware, for this is your other last resort. One more thing, the 4.4.2 update now equipped with a secured bootloader which similarly found on 4.3 updates, some circumstances is that you cannot revert back to the older software update version, for this breaks the bootloader image once gets re-written. So make sure to be aware with that if you are planning to install any ROMs that still based on 4.3 , or 4.2.2. If you are also rooted then you’ll lose root once the 4.4.2 installation has made, that’s because official firmwares wipes-out any modification you have made or installed in your device.

How to Manually Update T-Mobile Galaxy Note 3 SM-N900T to Official N900TUVENK3 4.4.2 Stock Firmware

Disclaimer: This method are used by Android developers and advanced users only. If ever this is your first time heard about this procedure, please make a careful research first before proceeding. We shall not be held any responsibility if anything happens to your device from using this guide. Proceed at your own risk!

Warning: This stock ROM is only compatible for Galaxy Note 3 N900T with SM-N900T (T-Mobile) specific model only. Do not ever try to use this firmware on other Samsung Galaxy Note 3 variants.

FAQS:
Q: Will I lose root once installed the N900TUVUENK3 update?
A: Yes, this will restore your device into official firmware.
Q: Can I install root again once upgraded to N900TUVUENK3 4.4.2 KitKat version?
A: Yes, this firmware build can be rooted, but be aware about the new KNOX security platform hidden inside the system that completely voids the warranty of your device once gets tripped by means of rooting or installing any custom recovery. This sets “KNOX warranty Void: 0×1 from 0×0″ (You can see this when you set your device in download mode). This cannot be reset by any means.

Download the original N900TUVUENK3 Stock Firmware:

Stock Odin Firmware N900TUVUENK3
Download N900TUVUENK3 4.4.2 Stock Firmware -> link
Previous Updates: N900TUVUDNF9 4.4.2 firmware update

Prerequisites:

Before you proceed prepare these necessary things as follows so you’ll not screwed-up your phone:
Create a back-up all your personal data, like: Contacts, Messages, Applications, Pictures and Videos, so that you will not lost it just in-case something might went wrong after the update.
• Make sure that your Galaxy Note 3 battery is fully charged to ensure stability and to get rid pf power failure issues while updating.
• Close all softwares, such as KIES suite, Antivirus, firewalls, to prevent the possible conflict.
• Prepare a personal computer or laptop with Windows OS.
• Enable USB debugging mode if you are having issues connecting your device to the computer try to enable the this option. In your Samsung Galaxy Note 3, go to Settings>> About device>> then look for the firmware build number and then tap that build number for around 7-times until a message pop-ups that says something “congratulations you are now a developer”.
• TURN OFF the Reactivation Lock – Got Settings>>Security>>Reactivation Lock and then uncheck the Turn Reactivation lock on. This is only needed if you already turned-it-ON, from which you cannot modify the system when it’s turned-ON.

Galaxy Note 3 reactivation lock

Stock Firmware 4.4.2 N900TUVUENK3 – Odin Flashing Method

Odin downloader – Odin3_v3.09
USB DriverDrivers are here (only needed if you haven’t installed Kies)

1) Extract the downloaded N900TUVUENK3 firmware or stock ROM. Use winzip, 7zip,winrar or any decompressing program you have in your computer.
2) Run Odin3_v3.09 flasher program.
3) Just click on the PDA button then select and load the N900TUVUENK3 firmware.
‘N900TUVUENK3_N900TTMBENK3_Home.tar.md5′
DO NOT check ‘Re-Partition’ option. Check Auto Reboot and F.Reset Time check-boxes.

N900TUVUENK3 Stock Firmware

4) Reboot the Galaxy Note 3 into Download Mode: Turn it Off first. Now Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.
5) Connect USB data cable to Phone. The ID:COM box will highlight and turn to a bluish color when the phone is properly connected and already recognized with Odin.
6) Tick the ‘START’ button when all is set and ready to begin flashing.
7) DO NOT disconnect nor do anything when the phone is already in flash mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. (If you get failed errors, check the USB connection condition, repeat the whole process)
8.Wait until the phone completely reboots, then unplug it from PC.
Do factory reset again after flashing.
This is only optional just in-case you’ll experience bootloop and lag issues after flashing.
Press and hold Volume Up+ Home+Power button, then select the Wipe Data/Factory Reset, to gain a fresh firmware installed.