Install G920FXXU2BOGE Update on Galaxy S6 SM-G920F, Official 5.1.1 Lollipop Stock Firmware

New Samsung Galaxy S6 (SM-G920F) update with baseband version to G920FXXU2BOGE. The G920FXXU2BOGE is an Android 5.1.1 base and officially released in Europe with different build numbers under (LRMY47X) such as G920FXXU2BOG8, G920FXXU2BOGA, and G920FXXU2BOGC.

Again this stock firmware is only for advanced users who rushed in into rooting and have customized their Galaxy S6. Since OTA update cannot get through and will not support on a modified device anymore. So if you might want to restore back your device to the latest and official firmware update, then you can use this method to manually upgrade.

There are several changes you may find on Android 5.1.1 update, including device stability, bug fixes, and security enhancements.  Some noticeable features are the A-Z button for sorting the app icons in alphabetical order and exposure slider in the camera.

How to manually upgrade to G920FXXU2BOGE Android 5.1.1 Lollipop on Galaxy S6 SM-G920F

Note: This stock firmware is compatible for all Europe unbranded or unlocked Samsung Galaxy S6 with the specification model number “SM-G920F″ versions only.

Disclaimer: This guide is for advanced users only, if this your first time heard about this method, make a careful research first before proceeding. We shall not be held responsible if anything happens to your device by using this guide. Proceed at your own risk!

Step-1: Download the tools.

– Odin3_v3.10.6 Flasher tool (find it here)

– Samsung Galaxy S6 USB driver, find the Android 5.0.2/5.1.1 USB driver version here.

These are both unbranded and carrier branded stock firmware packages and are only compatible on Galaxy S6 SM-G920F only. You may only grab the right one that’ll match your country and network provider.

Build: LMY47X.G920FXXU2BOGC

Android version: 5.1.1
Baseband version: G920FXXU2BOGE
Kernel Version: 3.10.61-5012324
Build Number: LMY47X.G920FXXU2BOGC
other info:
AP: G920FXXU2BOGC
CSC: G920FTEF2BOG1
CP: G920FXXU2BOGE
Build date: July 22, 2015

COUNTRY/CARRIER CSC FIRMWARE
Germany (o2) VIA  (link)
Spain (Movistar) XEC  (link)
United Kingdom (o2) O2U  (link)

Build: LMY47X.G920FXXU2BOGB

This is not under “BOGE” but only added for select countries in Europe

Android version: 5.1.1
Baseband version: G920FXXU2BOGF
Kernel Version: 3.10.61-5447113
Build Number: LMY47X.G920FXXU2BOGB
other info:
AP: G920FXXU2BOGB
CSC: G920FNEE2BOG8
CP: G920FXXU2BOGF
Build date: July 21, 2015

COUNTRY/CARRIER CSC FIRMWARE
Denmark, Finland, Iceland, Norway and Sweden NEE  (link)
Netherlands PHN  (link)
Spain PHE  (link)

Build: LMY47X.G920FXXU2BOGA

Android version: 5.1.1
Baseband version: G920FXXU2BOGE
Kernel Version: 3.10.61-5012324
Build Number: LMY47X.G920FXXU2BOGA
other info:
AP: G920FXXU2BOGE
CSC: G920FFTM2BOGA
CP: G920FXXU2BOGA
Build date: July 21, 2015

COUNTRY/CARRIER CSC FIRMWARE
France (Orange) FTM  (link)
Romania (Orange) ORO  (link)

Build: LMY47X.G920FXXU2BOG8

Android version: 5.1.1
Baseband version: G920FXXU2BOGE
Kernel Version: 3.10.61-5012324
Build Number: LMY47X.G920FXXU2BOG8
other info:
AP: G920FXXU2BOG8
CSC: G920FOXABOG8
CP: G920FXXU2BOGE
Build date: July 21, 2015

COUNTRY/CARRIER CSC FIRMWARE
Austria ATO  (link)
Belgium (Proximus) PRO  (link)
France XEF  (link)
France (Bouygues) BOG  (link)
Germany DBT  (link)
Greece EUR  (link)
Hungary XEH  (link)
Italy ITV  (link)
Luxembourg LUX  (link)
Norway (Telenor) TEN  (link)
Poland XEO  (link)
Romania ROM  (link)
Russia SER  (link)
United Kingdom BTU  (link)
United Arab Emirates XSG  (link)

just going to add more countries if somehow might also available soon)

Step-2: Prepare things as follows:

– Use a PC or laptop that runs in Windows OS, with a good and perfectly working USB serial port.

– Use the USB data cable for your Galaxy S6.

– Make sure that your Galaxy S6 battery is fully charge.

– Back up all important files stored from your phone’s internal memory – contacts, messages, etc. Use Samsung Smart Switch for PC to backup and restore your files. .

– Enable USB debugging from your phone’s settings. Go to Settings > Applications > Development, and tick the box that says ‘Enable USB Debugging’.

– Do a “Hard Reset” if you have a lot of 3rd party applications installed from your phone, this is useful to gain a smooth flashing. (Just make sure that you already back up all your important files before resetting your device.Step 3: Extract or unzip the downloaded stock firmware so that you’ll get the Odin flashable .tar.md5 file. 

Step-3: Run and Configure Odin

Run Odin downloader on your computer’s desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘RE-PARTITION’ is unchecked. Leave the ‘AUTO-REBOOT and ‘F.RESET TIME’ remains checked.

Now, click on the AP button, then select and load the tar file that you have previously extracted.Here’s how Odin should look like.The “G920FXXU2BOG8_G920FOXA2BOG8_HOME.tar.md5″ should be loaded on the AP button.

Step-4: Reboot the Galaxy S6 into Download Mode.

To set your Galaxy S6 in download mode, just simply switch it off then gently press and hold the “POWER, VOLUME DOWN and HOME” buttons simultaneously. You’ll be then prompted in a warning screen to continue or cancel.

Step-5: Connect the Phone to the Computer or Laptop.

Once the phone screen shows in downloading mode, connect your phone to the PC with the USB cable. You’ll then notice the upper box in Odin that turns in yellow color., it also indicates the COM:ID where the device is being detected and a word “added!!’ on the log box. If somehow those things never showed up, check out the USB cable connection, read again from the top of this post.

Step-6: Flash it!

Once all set and ready, hit he “START” button to begin flashing.

Do not touch anything that might interrupt the process to avoid any fatal errors or failures, it may ruin your device if any interruption occurs while already in flashing status.It may only takes about 3 to 5 minutes, depends of your PC/laptop speeds. A word “PASS” will display in Odin once it finishes. If somehow you will not get the word “PASS” or just stuck in a long time. Disconnect the phone, check the USB connection, re-install the driver, disable Kies and any anti-virus. Set the phone in Download mode again, and repeat the whole procedure.The phone will just automatically reboots if the firmware flashing successfully completes. Just wait until it boots up on the “Samsung” logo for a while then into an android update screen. If it still shows boot logo try rebooting and if it stays there, you need to wipe your phone.

How to Fix possible issue after flashing like bootloop or just stuck in welcome screen logo.

This problem only occurs if your Galaxy S6 is previously rooted  or runs on modified and non-Samsung firmware. You may try to resolve it by booting the device in recovery mode – Press and hold Volume Up, Home and Power button. Use volume keys to select up and down and power or home key to select the option.1. Select Wipe Data/Factory Reset

2. Next select the Wipe Cache Partition

3. Lastly select Reboot System Now to reboot your Galaxy S6 in Normal mode.

Confirm your fresh firmware being installed, just go to Settings > About device.

That’s it! Your Samsung Galaxy S6 should now restored back in official;  Android 5.1.1 Lollipop update with baseband version G920FXXU2BOGE.