Install M919UVUFOH3 T-Mobile Galaxy S4 SGH-M919, The Stagefright Fix Update

Stock firmware build M919UVUFOH3 that’s the T-Mobile Samsung Galaxy S4 SGH-M919 update to fix the recent Stagefright vulnerability. If weren’t to the said Android security flow, this device might not get any update anymore. As we’ve started  covering this phone way back two years ago, and so we’ll have to finish it until it last.  An update is any update anyway, and I believed that there are still many folks out there still rocking this phone.

By the way, the ;M919UVUFOH3 is still in Android 4.4.4 KitKat base, and not the an Android 5.0 Lollipop. The T-Mobile Samsung Galaxy S4 SGH-M919 is the only device in the United States that did not get any Lollipop update. So those who might want to manually install the M919UVUFOH3 update, then just grab the stock firmware below.

Technical Details of M919UVUFOH3 Android 4.4.4

Device Name: Samsung Galaxy S 4
Model number: SGH-M919
Carrier: T-Mobile
Country: U.S.A.
Android version: 4.4.4
Baseband version: M919UVUFOH3
Kernel Version: 3.4.0–2437203
Build number: KTU84P.M919UVUFOH3
AP: M919UVUFOH3
CSC: M919TMBFOH3
CP: M919UVUFOH3
Build date: 24, August 2015
Release date: 03, September 2015

M919UVUFNH7-T-Mobile-Galaxy-S4-M919-KitKat-update

How to get the OTA update M919UVUFOH3 for Rooted T-Mobile Galaxy S4 M919

You must unroot or return back your T-Mobile Galaxy S4 SGH-M919 to official Android 4.4.4 update build M919UVUFNK2,
Once installed and completely restored back to pure stock 4.4.4 firmware, you can simply root again using the same root method that had worked and you’ve used before.

Manually Update T-Mobile Galaxy S4 SGH-M919 to Official Android 4.4.4 KitKat M919UVUFOH3

Disclaimer: This method is used by Android developers and advanced users only. If ever this is your first time heard about this procedure, please make a careful research first before proceeding. We shall not be held any responsibility if anything happens to your device from using this guide. Proceed at your own risk!

Warning: This stock ROM is only compatible for Samsung Galaxy S4 with SGH-M919 (T-Mobile) specific model only. Do not ever try to use this firmware on other Samsung Galaxy S4 variants.

FAQ’s:

Q: Will I lose root once using this method?
A: Yes, this will restore your device into official firmware.
Q: Can I install root again once upgraded to this version?
A: Yes, this firmware build can be rooted, but be aware about the new KNOX security platform hidden inside the system that completely voids the warranty of your device once gets tripped by means of rooting or installing any custom recovery. This sets “KNOX warranty Void: 0×1 from 0×0″ (You can see this when you set your device in download mode). This cannot be reset by any hacking method except by Samsung service personnel using a special reset tool of-course and or changing the entire PCB board.

Prerequisites:

Before you proceed prepare these necessary things as follows so you’ll not screw-up your phone:

– Create a back-up all your personal data, like: Contacts, Messages, Applications, Pictures and Videos, so that you will not lost it just in-case something might went wrong after the update.
– Make sure that your Galaxy S4 battery is fully re-charge to ensure stability and to get rid pf power failure issues while updating.
– Close all softwares, such as KIES suite, Antivirus, firewalls, to prevent the possible conflicts.
– Prepare a personal computer or laptop with Windows OS.

Odin downloader – Odin3_v3.09
USB Driver – Drivers are here
Stock Odin Firmware M919UVUFOH3: Download

1) Extract the downloaded firmware or stock ROM. Use winzip, 7zip,winrar or any decompressing program you have in your computer.
2) Run Odin Downloader v3.09 flasher program.
3) Just click on the PDA button then select and load the binary image.
‘M919UVUFOH3_M919TMBFOH3_M919UVUFOH3_Home.tar.md5′
DO NOT check ‘Re-Partition’ option.
leave these checked: Auto Reboot and F.Reset Time checkboxes.
4) Reboot the Galaxy S4 into Download Mode: Turn it Off first. Now Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.
5) Connect USB data cable to Phone. The ID:COM box will highlight and turn to a bluish color when the phone is properly connected and already recognized with Odin.
6) Tick the ‘START’ button when all is set and ready to begin flashing.
7) DO NOT Interrupt, touch nor do anything when the phone is already in flashing progress mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. (If you get failed errors, check the USB connection condition, repeat the whole process)
8.Wait until the phone completely reboots, then unplug it from PC.
Do factory reset again after flashing.
This is only optional just in-case you’ll experience bootloop and lag issues after flashing.
Press and hold Volume Up+ Home+Power button, then select the Wipe Data/Factory Reset, to gain a fresh firmware installed.