Install G920TUVU3EPD1 Android 6.0.1 Marshmallow on T-Mobile Galaxy S6 SM-G920T

Just like the T-Mobile Galaxy S6 Edge SM-G925T Marshmallow update, the Galaxy S6 SM-G920T has also received its first Android 6.0.1 Marshmallow update. Here it goes the Android M update stock firmware to which came up as build version G920TUVU3EPD1. This stock firmware for those who owned a modified and or rooted Galaxy S6 that will no longer receives the via Over-The-Air (OTA) update. So if you want to get the official Marshmallow update you may need to return back your device to its official firmware first.  This method will eventually wiped out the root access and any modification you have previously installed.

Here;s what the technical details about the Android 6.0.1 Marshmallow update dubbed as the G920TUVU3EPD1 build.

  • Device: Samsung Galaxy S6
  • Carrier: T-Mobile USA
  • Model number: SM-G920T
  • Android version: 6.0.1 (Marshmallow)
  • Android security patch level: April 02, 2016
  • Baseband version: G920TUVU3EPD1
  • Kernel version: 3.10.61-7610624
  • Build number: MMB29K.G920TUVU3EPD1
  • AP: G920TUVU3EPD1
  • CSC: G920TTMB3EPD1
  • CP: G920TUVU3EPD1
  • Build date: April 01, 2016

Changes:

  • OS upgrade – Android 6.0.1 Marshmallow.
  • The following functions were removed: Facebook messanger, Instagram, Whatsapp.

Download G920TUVU3EPD1 Android 6.0.1 Marshmallow Stock Firmware

This is the untouched nor unmodified, and has remained as official Marshmallow firmware as it was – DOWNLOAD!

Important: This stock firmware is for T-Mobile Samsung Galaxy S6 SM-G920T (U.S.A.) version only. DO NOT EVER ATTEMPT to use it on any other Galaxy S6 variant such as the SM-G920A (AT&T), SM-G920P (Sprint), SM-G920V (Verizon), SM-G920W8 (Canada), and including those international version the SM-G920F and SM-G920I.

Pre-requisites:

  • Make a full backup of all important data stored from your phone and saved it in your computer. I highly recommend this as we are going to perform a full factory data reset, wipe cache to obtain a fresher and clean installation. Don’t be lazy.
  • Perform a Full wipe factory data/reset before and after flashing so your phone’s memory cache will be cleaned-up as those remained data out there will cause trouble. This resolves and help to get rid of lag issues once the installation is finished. Read at the bottom of this post on how to perform a factory reset.
  • Re-charge your phone’s battery, fully charge just to make sure.
  • Use a PC with perfectly working USB serial port.
  • Use the supplied USB cable for your Samsung Galaxy S6.
  • Enable USB debugging from your phone’s settings – Settings > About Phone, then scroll down to the build number and tap that number for around 7-times ’til the Developer option appears. Hit back to Home > Settings >Developer option > Enable USB debugging.
  • TURN OFF the Reactivation Lock – This is only needed if you already turned-it-ON, from which you cannot modify the system when it’s turned-ON. Go to Settings >Security >Reactivation Lock and then uncheck the Turn Reactivation lock on.

FAQ’s

Q: My Samsung Galaxy S6 is rooted, will I lose root once installed the official firmware?
If your device is currently rooted you will lose root after flash, but you can still root it again if you want.
Q: Will this method triggers KNOX Warranty counter to 0x1?
No, this is an official and signed Android 6.0.1 Marshmallow firmware released by Samsung, so flashing official firmware will not harm KNOX warranty void flag.

Disclaimer: Use of this method is solely at your own risk! Please proceed with precautions, for we will not take any responsibility if anything happens to your device by using this guide.

How to Flash the Android 6.0.1 Marshmallow, Firmware build G920TUVU3EPD1?

Grab The Tools:

  1. Odin3_v3.10 (grab it here)
  2. A USB Driver if you have not yet installed Smart Switch for PC or (grab it here)

Install the Samsung Galaxy S6 USB driver.

Install the USB Driver first to get rid of flashing failures. You may also need to extract the downloaded file which is packed in a (zip) so that you’ll get the (tar.md5) file.

Run and Configure Odin.

Run Odin multi-downloader Odin3_v3.10 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘Phone Bootloader Update’ (only if your device runs on 4.3), ‘AUTO-REBOOT’ and ‘F.RESET TIME’ checkboxes must be checked. Only the ‘RE-PARTITION’ is unchecked.

Reboot the Samsung Galaxy S6 into Download Mode.

To reboot the Samsung Galaxy S6 SM-G920T into download mode, you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.

You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The downloads mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”

Connect the SGS 6 Phone to PC.

Once you already reboot the phone in download mode, simply connect the phone to your PC. In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a message says “Added” on a log cat box will prompt you that the device is already detected or recognized by Odin. Your COM port number might be different from mine. If you do not see a COM port number then there’s something missing or wrong. You may read again from the top of this post.

Load the stock G920TUVU3EPD1 Android 6.0.1 Marshmallow stock firmware.

The stock firmware is packed in a single .tar.md5 file only. Simply click on the AP button, then browse to the folder where the file you have previously extracted and then select and load it.
“G920TUVU3EPD1_G920TTMB3EPD1_G920TUVU3EPD1_HOME.tar.md5″

Start on Flashing the G920TUVU3EPD1 stock firmware.

Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock ROM. Do not ever interrupt the phone while already in flashing progress, like disconnecting the cable or turning off the device. Just wait until it completely finishes.

Wait until you see the PASS!! message.

When the Stock Firmware installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing already finishes, and on the log box it says “All threads completed (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s about time to remove it from PC or laptop USB connection.

How to get rid of lag issues and achieved a more stable Android 6.0.1 Marshmallow on your Galaxy S6.

Some folks might miss this part, then there goes this lag problem here and there. This will also affect the battery life performance. So it is much better to perform a full wipe and factory reset once before and after flashing a stock firmware. This will not just avoid getting into any issues, but you can also achieve a cleaner and fresher firmware installation. Just do make sure you all important data has a backup copy and already saved in a safe place before doing this. This process does not cover on any outdated apps that cause incompatibility issues on Android 6.0.1 Marshmallow OS, all you need is find any updates on that particular apps to fixed any issues.

Performing Full Wipe Data/Factory Reset on Samsung Galaxy S6 in Recovery Mode

1. Press and hold Volume Up, Home and Power button.

2. Use volume keys to select, Up and Down and Power or Home key to select the option

3. Select Wipe Data/Factory Reset using the Home button.

4. Next select the “Wipe Cache Partition”.

5. Lastly, select “Reboot System Now” to reboot your Samsung Galaxy S6 G920T in Normal mode.

More workarounds if ever encountered:

Some apps has FC’s and lag issues.

Individual apps requires an update prior to Android 6.0.1 Marshmallow compatibility or otherwise it just causes the problem. Once the update has made, you might also check on each apps first if it still runs perfectly.