T-Mobile Samsung Galaxy S5 SM-G900T G900TUVU1DOB1 stock Android 5.0 Lollipop firmware. The G900TUVU1DOB1 is the first official Android 5.0 Lollipop update next to Android 4.4.2 KitKat G900TUVU1CNK2. But this device might also get either an Android 5.0.1 and Android 5.0.2 Lollipop update soon. The latter had technically skipped the Android 4.4.4 KitKat update and simply jumped-up to Android 5.0 Lollipop. Unlike Verizon and Sprint Galaxy S5 models also got their own 5.0 Lollipop update last week but it was an update from 4.4.4 KitKat.
Since the update has just recently rolled out via over-the-air OTA update and thru Samsung Kies. But it is only mostly convenient for those who did not root and modified their SGS 5 SM-G900T. But for those who a got a rooted devices and might want to restore back to the official firmware then you can manually install the official G900TUVU1DOB1 5.0 stock firmware below. Just read on the whole procedures on how to manually upgrade you Galaxy S5 G900T to official Android 5.0 Lollipop.
Technical Details of G900TUVU1DOB1 5.0:
Device name: Samsung Galaxy S5
Model number: SM-G900T
Android version: 5.0 (Lollipop OS)
Baseband version: G900TUVU1DOB1
Kernel version: 3.4.0-4033351
Build number: LRX21T.G900TUVU1DOB1
- Android 5.0
- Activates Wi-Fi calling 2.0
- Wi-Fi calling experience
- Resolved Wi-Fi calling one way audio
- Resolved IPv6 email setup
Previous OTA updates:
The G900TUVU1DOB1 can be downloaded via OTA update or through Samsung Kies.
Just escalate to T-Mobile support page for more details– https://support.t-mobile.com/docs/DOC-10398
Below is the official firmware build G900TUVU1DOB1 5.0 Lollipop for advanced users that did not get the update beforehand as long as the phone has been modified.
How to Manually Install the Stock G900TUVU1DOB1 5.0 Lollipop
FAQ’s About Installing the Stock Lollipop DOB1
Does it tripped KNOX warranty flag counter to 0×1?
No, this is an official and signed firmware from Samsung, so flashing official firmware will not trip KNOX warranty void counter from ‘0x0 to 0x1′.
My Samsung Galaxy S5 SM-G900T is rooted, will I lose root?
Yes, you will lose root after flashing the stock Android 5.0 Lollipop as it will return back your phone to official state. But you can still root it again anytime you want.
Disclaimer: Use of this method is solely at your own risk! Please proceed with precautions, for we will not take any responsibility if anything happens to your device by using this guide.
• Make sure that your Samsung Galaxy S5 SM-G900T is recharge or at-least 40% remaining battery power.
• Stock Firmware packages comes in two formats the ‘Full-Wipe’ (delete your stored data after flashing) and the ‘Non-Wipe’ (it doesn’t delete your stored data) but it is highly recommended to make a back up all important files stored from your phone’s internal memory – contacts, messages, etc. before flashing no-matter if it is Full-Wipe or Non-Wipe, just to be safe and ensure that your stored data are in safe if something went wrong during the flashing process.
• Use the supplied USB cable for your Samsung Galaxy S5 SM-G900T.
• Enable USB debugging from your phone’s settings – Settings>>About Phone>> then scroll down to the build number and tap that number for around 7-times ’til the Developer option appears.
• Use a PC or laptop that runs in Windows OS, with a good and perfectly working USB serial port. Odin will not work on MAC OS.
• Ensure that KIES is closed and not running in the system tray! Kies and Odin are both created by Samsung but Kies will interrupt and doesn’t like Odin, it will block you from flashing.
Download the G900TUVU1DOB1 5.0 Lollipop Firmware:
SM-G900T T-Mobile Galaxy S5 – G900TUVU1DOB1 Stock ROM Download – (link)
Important Note: This stock firmware is for T-Mo’s Galaxy S 5 dubbed with model number SM-N900T. DO NOT EVER try to install it on any Galaxy S5 models as it might result into unbearable bricks.
Install the Samsung Galaxy S5 SM-G900T USB driver
Install the USB Driver first to get rid of flashing failures. You may also need to extract the downloaded file which is packed in zip or rar files, so that you’ll get the tar.md5 file.
Run and Configure Odin
Run Odin downloader Odin3_v3.09 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘Phone Bootloader Update’ (only if your device runs on 4.3) , ‘AUTO-REBOOT’ and ‘F.RESET TIME’ checkboxes must be checked. Only the ‘RE-PARTITION’ is unchecked.
Reboot your Samsung Galaxy S5 SM-G900T into Download Mode
To reboot the Samsung Galaxy S5 SM-G900T into download mode , you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.
You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”
Connect your Phone to PC or Laptop
Once you already reboot the phone in download mode, simply connect the phone to your PC or laptop USB.
In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin. Your COM port number might be different from mine. If you do not see a COM port number then there’s something missing or wrong. You may read again from the top of this post.
Load the stock G900TUVU1DOB1 5.0 tarball
The stock firmware is pack in a single .tar.md5 file only. Now, you need to just simply click on the AP button, then browse to the folder where the file you have previously extracted and then select and load it.
Start Flashing the stock firmware
Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock ROM. Do not ever interrupt the flashing process, such as disconnecting the cable or turning off the device. Just wait until it completely finish.
Wait until you see a ‘PASS!!’ message
When the Stock Firmware installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing was already finish, and on the log box it says “All threads completed (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s about time to remove it from PC or laptop USB connection.
Confirm if you successfully installed the stock firmware
Go to Settings>About Device>Firmware info.
Possible errors that you may encountered, this is based on my own experience while flashing stock firmware on Samsung Android devices. These are just a few hints on how to resolved it.
Q: I got an error message that says “Set-up connection Failed” ?
A: 1. Check your USB connection from the phone to PC,
2. Connect to another PC USB port
3. Check and or try to another USB cable
4. Re-install the USB driver.
Q: Odin just suddenly stuck in the middle of nowhere while in flashing progress, it isn’t responding at all?
A: Check for possible program that might interrupt the process, like disabling the anti-virus and closing any running programs. Also try to use another computer or laptop,
Q: I experienced bootloop or the phone just stuck on Welcome Logo (phone always stop at bootanimation) and it won’t boot normally?
A: This eventually happens if your device came from custom firmware but you can fix it via by performing factory reset in recovery mode:
How to Perform Wipe Data/Factory Reset in Recovery Mode
Ensure that you already saved a back-up copy of all important data stored from the phone. This process will delete all data so keep that in mind.
1. Press and hold Volume Up, Home and Power button.
2. Use volume keys to scroll. Power or Home key to select the option.
3. Select ‘Wipe Data/Factory Reset‘ using the Home button.
4. Next select the ‘Wipe Cache Partition‘.
5. Lastly, select ‘Reboot System Now‘ to reboot your Samsung Galaxy S5 SM-G900T in Normal mode.