Firmware build G920TUVUDOH6 for T-Mobile Galaxy S6 (SM-G920T) — an official 5.1.1 OTA update, released on September 10, 2015. The G920TUVUDOH6 update brings some new features such as the T-Mobile video calling support, Advanced messaging, Google Wallet, Dropbox and the Device owner profile. So anyone might have a rooted and or a modified Galaxy S6 (SM-G920T), that eventually cannot get any software update anymore, all you need to do is grab the G920TUVUDOH6 stock firmware itself. You may then manually flash it using Odin tool and your device will then updated to G920TUVUDOH6 in no time.
In addition, the G920TUVU2DOH6 bootloader hasn’t locked up. So it simply means once you flashed or restore to stock G920TUVU2DOH6 you can still regain root on it again anytime you might want to.
Changelog details of the G920TUVU2DOH6 5.1.1 update:
- Advanced Messaging
- T-Mobile Video Calling
- Google Wallet
- Work Profile/Device Owner
How to Install the G920TUVU2DOH6 5.1.1 stock firmware:
- Ensure to fully recharge your phone’s battery, as this is a firmware manual flashing procedure and not like updating via OTA.
- (Optional) Backup all important files stored from the phone’s internal memory such as contacts, photos, videos, MMS, SMS, emails, docs etc. Though, a most of stock firmware is non-wipe but in some circumstances if the flashing might go wrong it will delete all of your files.
- (Optional) Perform factory reset to gain a smooth firmware flashing without failures especially if the device is rooted and running in an unofficial firmware. You may backup
- Turn on the OEM unlocking in developer option. From Settings > Developer option > OEM unlocking then slide the toggle switch to ON.
- Turn on the USB debugging mode in developer option. From Settings > Developer option > USB debugging then slide the toggle switch to ON.
- Use a PC computer, Odin will not run on Mac.
- Use the supplied USB data cable of your Galaxy S6, flashing failures is mostly caused by bad USB cable. So, make sure you have a perfectly working USB data cable.
Grab the necessary files for manual flashing.
– Install the USB driver for Samsung Galaxy S6 just download and install Smart Switch as it includes the USB driver or grab it here.
– Download Odin Odin3_v3.10.6 here
– Download G920TUVU2DOH6 Stock Firmware (This is the official firmware which was directly pulled from Smart Switch firmware server, it is untouched or any kind and remained as original as it was)
Again, this stock firmware is specifically for the Galaxy S6 with model number SM-G920T a T-Mobile version only. Do not play it around on any other Samsung Galaxy S6 variants or else you may wonder why when you brick your phone. I warned you.
Disclaimer: This is an advanced users method. Use of this guide is solely at your own risk!
- Extract or unzip the downloaded firmware, Odin flasher program can’t read it until you’ll get the correct file path which is in a (.tar) file format.
- Run Odin3 v3.10.6 flasher program.
- Do Not check the Re-Partition check box. Mark check these check boxes Auto Reboot and F-Reset Time and nothing else.
- Reboot the phone in download mode: To reboot the Galaxy S6 into download mode, you need to turn the power off. Once completely shut down, just press and hold the Volume Down key, Home button, and the Power button at the same time.
- You should then prompted into a warning screen and asking you to press Volume Up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode screen displays a box and says’s “Downloading.. Do not turn off target!!”
- Connect the phone to PC when it’s only in the Download Mode screen. You should notice that the ID:COM box on ODIN will turn to blueish and will show you the port (COM) number.
- Click on the AP button then browse to the folder where you extracted the stock firmware. AP: “G920TUVU2DOH6_G920TTMB2DOH6_G920TUVU2DOH6_Home.tar.md5″
- Hit the “START’ button if everything seems all good to start flashing.
- Wait until you see the huge word “PASS!’ .
- Disconnect the phone from the computer once it has completely reboots.
- Optional: perform Wipe data / Factory reset to again.
Fixing possible failures on Odin:
If you ain’t see the word ‘PASS!’ and it says ‘completed 0/failed 1′, all you need is just repeat the procedure above.
If it still fails, check the following again:
- Try to use other USB data cable.
- Try to use other computer USB port.
- Try to use other PC
For fixing bootloops and stuck in Samsung logo:
If you have bootloop, stuck at the welcome screen logo on the first reboot. Just perform a full data factory reset as this issues usually happens when your phone came from a modified system images, such as rooted kernels, custom recoveries, and unofficial firmware and you insist to perform wipe data before restoring to stock.
– Wait a couple of minutes as the firmware installation still refreshing.
– If it continuous on an hour, perform a factory reset via recovery.
Just hold down Volume Up, Home, and Power button at the same time. Once the phone displays the recovery options scroll down using the Volume keys and then select Wipe Data/Factory reset. Re-flash the stock firmware if necessary.