Galaxy S7 edge G935F Android Nougat G935FXXU1DPLT first official update released. This is similar update that has also been brought out on Galaxy S7 G930F to which comes in build version G930FXXU1DPLT. Again, this update is only being held available in United Kingdom as of this moment, since the said country has been running the Nougat beta updates way back in December. So it goes out that this is the final build of the said Android Nougat that were now officially release for the public.
So for those advance Android users that might want to upgrade their Galaxy S7 edge G935F to Android 7.0 Nougat from Android 6.0.1 Marshmallow, simply grab the stock firmware build G935FXXU1DPLT itself. Just read on to our step-by-step guide on how to install it manually on to the device.
Nougat Update version G935FXXU1DPLT Technical Details:
- Device: Galaxy S7 edge (international version)
- Model number: SM-G935F
- Android version: 7.0 (Nougat)
- Android security patch level: January 1, 2016
- Baseband version: G935FXXU1DPLT
- Kernel version: 3.18.14-10273029
- Build number: NRD90M.G935FXXU1DPLT
- AP: G935FXXU1DPLT
- CP: G935FXXU1DPLT
- CSC: G935FOXA1DPLT
What’s New in Nougat Update :
- Android 7.0 Nougat OS upgrade
- Provides new UX and various performance modes
- Improved usability of the Notification feature and Quick settings button
- Improved usability of the Multi-window
- Improved setting menu and Always On Display
- Efficient space for installation of downloaded apps, improved speed of system upgrade and app installation
Once installed, you may then upgrade your apps as it may not work properly if it haven’t been optimized with Nougat update.
How to Manually install Galaxy S7 edge G935F Stock Firmware
Download the G935FXXU1DPLT Stock Firmware Package:
G935FXXU1DPLT – (HERE)
Before you proceed prepare these necessary things as follows so you’ll not messed-up your phone:
• Backup all your personal data – Use “Samsung Smart Switch for PC“ (Google it) to easily make a backup of your Contacts, Messages, Applications, Pictures, and Videos, so that you will not lose it. You must do this because the recent firmware packages will wipe out your device stored data.
• Recharge the device battery – Make sure that your Galaxy S7 edge battery is fully recharged to ensure its stability. A power failure during the installation process may harm your device.
• Prepare a PC as this process will not tend to work in Mac computers.
• Enable OEM unlocking mode – This thing wan’t there before during the old times, but if this feature is already enabled in your device. Just go to Settings > About device > then look for the firmware’s Build number and then tap that build number for around 7-times until a message pop-up that says something like “Congratulations you are now a developer!”. Then hit back in Settings > About device > Developer option > OEM Unlocking.
• Enable USB debugging mode if you are having issues connecting your device to the computer try to enable this option.go to Settings > About device > Developer option > USB debugging.
• TURN OFF the FRP Reactivation Lock – This also necessarily needed if your device already have this feature enabled. This is only needed if you already turned it ON, from which you cannot modify the system when and if it’s turned-ON.
To do this just got to Settings > Security > Reactivation Lock, and then uncheck the Turn Reactivation lock on.
Grab these necessary tools
- Odin3_v3.11.1 downloader or the latest version – This is best for flashing the Android 6.0.1 Marshmallow stock firmware
- USB Driver – only needed if you haven’t installed the latest Samsung Smart Switch in your PC.
Extract/Unzip the download stock firmware
Extract the downloaded firmware. Use any decompressing program you have had in your computer.
Reboot the Galaxy S7 edge G935F into Download mode
Reboot the Samsung Galaxy S7 edge G935F into Download Mode: Turn it Off first. Now, Press and hold the Volume Down, HOME and Power ON button at the same time. You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears. If you can’t get into it, repeat the 3-button combination again and again.
Run and Configure Odin3 Flasher
Run Odin3 flasher program. In Odin window DO NOT tick the option box that says ‘Re-Partition’. Leave ‘Auto Reboot’ and ‘F.Reset Time’ check-marked by default.
Add the firmware binary files to their designated slots in Odin such as: the “BL” (bootlooder) file goes to the “BL button/slot“, same goes about the “AP” (phone), “CP” (modem) and the “CSC” (consumer code) files. Once loaded, you need to wait for a while as Odin3 will check the files compatibility and authenticity.
Here are the line-up of which goes on Odin buttons.
In addition, in stock firmware packages you may find two CSC files. The one that says “CSC_G930F,” while the other one also says “Home_CSC_G930F“. Both were exactly the same thing and will wipe your data cache. The only differences in the configuration is that the former may include some hidden system images or it’s the full packaged, while the latter has not. That is why you should backup your important files first before flashing the stock firmware.
Connect the Galaxy S7 edge G935F into the computer
Connect the Galaxy S7 edge G935F to the computer using the supplied USB data cable. In Odin window, the ID: COM box will turn to a bluish color when the phone is properly connected and it’s an indication that it’s recognized with Odin. It also states as “Phone Added! in the log-cat.
Begin flashing the stock firmware
When all is set and you are ready into flashing just simply tick the ‘START’ button located at the lower part of Odin.
Avoid interrupting the process
DO NOT disconnect nor do anything when the phone is already in download mode and flashing status. You’ll messed up the phone if you accidentally interfere the installation process. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completed. However, if you get failed errors, check the USB connection condition, repeat the whole process or read the troubleshooting section below.
Wait until it says Pass!!
Odin3 will display a message that says “PASS!” when the process finishes. Wait until the phone completely reboots, then unplug it from the computer. However, if you might get the error message “FAILED!” you may check the troubleshooting procedures down below.
Update all your Apps
Once installed, you may then update all of your apps as it may not work properly if it haven’t been optimized with the Nougat update. You may experience lag issues when using some apps once your device is running on Nougat update, so it is necessarily to update your apps via Play Store or Galaxy Apps.
Troubleshooting if and when the firmware flashing fails
Do performing factory reset after flashing is necessary when the device previously runs on any modified ROM and unofficial firmware images?
This process is optional, but this method can get rid of the unwanted bootloop, rebooting issues, freezes and lag issues after the new firmware installation.
Press and hold Volume Up+ Home+Power button, then select the Wipe Data/Factory Reset, to gain a fresh firmware installed.
Odin keep on failing and I’ve tried everything from A to Z but still nothing works. What else can you suggest?
You may have attempted rolling back to an older firmware version. Noting that newer updates will not allow you to downgrade to an older firmware version. This is why Samsung and Google frequently released the Android security patches in a monthly basis. You must carefully keep an eye of each firmware build version. Please check back my insights about the stock firmware above.
Also, if you’ve use the stock firmware to unroot and or restoring back from a modified system images but cannot get through the during the flashing and you get Odin3 fail error, you may first sort things out like what root kernels and custom ROM, and any modified system images you have previously used before and try to find an answer to why it causes a flashing failure. Sometimes the problem is not on the stock firmware but lies in the modified system image you’ve used that causes the problem of not letting it through pass in Odin3.
If you have something to add and or in need for my assistance, just drop it on the comment form below.