G935UUEU4APL4 Galaxy S7 edge G935U Official Marshmallow Stock Firmware

An update build version G935UUEU4APL4 for US unlocked Samsung Galaxy  S7 edge SM-G935U. It something very similar update that has also been rolled out for the US unlocked Galaxy S7 SM-G930U dubbed as build version G930UUEU4APL2. The G935UUEU4APL4 brings the December Android security patches and it also contains several bug-fixes, an additional improvements for the device stability and performance, and other system enhancements.

In addition,  the G935UUEU4APL4 got the same “Bootloader” level if we comapre to the previous build G935UUEU4API3. That’s basically and simply  means that both are interchangeable with each other. If you are afraid of losing root, then you can root your device again using the same method you’ve used on G935UUEU4API3 and you can also roll back anytime you want.

Update version G935UUEU4APL4 Technical Details:

  • Model number: SM-G935U
  • Android version: 6.0.1 (Marshmallow)
  • Android security patch level: December 1, 2016
  • Baseband version: G935UUEU4APL4
  • Kernel version: 3.18.20-9978521
  • Build number: MMB29M.G935UUEU4APL4
  • AP: G935UUEU4APL4
  • CP: G935UUEU4APL4
  • CSC: G935UOYM4APL4

Previous update version:

  • Android version: 6.0.1 (Marshmallow)
  • Android security patch level: September 1, 2016
  • Baseband version: G935UUEU4API3
  • Kernel version: 3.18.20-9049622
  • Build number: MMB29M.G935UUEU4API3
  • AP: G935UUEU4API3
  • CP: G935UUEU4API3
  • CSC: G950UOYM4API3

How to Manually install Galaxy S7 edge G930U Stock Firmware

Download the G935UUEU4APL4 Stock Firmware Package:

G935UUEU4APL4 2017 January – (DOWNLOAD)
Previous version:
G935UUEU4API3  2016 October – (DOWNLOAD)

Prerequisites:

Before you proceed prepare these necessary things as follows so you’ll not  messed-up your phone:

Backup all your personal data – Use “Samsung Smart Switch for PC (Google it) to easily make a backup of your Contacts, Messages, Applications, Pictures, and Videos, so that you will not lose it. You must do this because the recent firmware packages will wipe out your device stored data.

Recharge the device battery – Make sure that your Galaxy S7 battery is fully recharged to ensure its stability. A power failure during the installation process may harm your device.

Prepare a PC as this process will not tend to work in Mac computers.

Enable OEM unlocking mode – This thing wan’t there before during the old times, but if this feature is already enabled in your device.  Just go to Settings > About device > then look for the firmware’s Build number and then tap that build number for around 7-times until a message pop-up that says something like “Congratulations you are now a developer!”. Then hit back in Settings > About device > Developer option > OEM Unlocking.
galaxy-note-4-oem-unlocking

Enable USB debugging mode if you are having issues connecting your device to the computer try to enable this option.go to Settings > About device > Developer option > USB debugging.

TURN OFF the FRP Reactivation Lock – This also necessarily needed if your device already have this feature enabled. This is only needed if you already turned it ON, from which you cannot modify the system when and if it’s turned-ON.

To do this just got to Settings > Security > Reactivation Lock, and then uncheck the Turn Reactivation lock on.

Grab these necessary tools

  1. Odin3_v3.11.1  downloader or the latest version –  This is best for flashing the Android 6.0.1 Marshmallow stock firmware
  2. USB Driver – only needed if you haven’t installed the latest Samsung Smart Switch in your PC.

Extract/Unzip the download stock firmware

Extract the downloaded firmware. Use any decompressing program you have had in your computer.

Reboot the Galaxy S7 edge G935U into Download mode

Reboot the Samsung Galaxy S7 edge G935U into Download Mode: Turn it Off first. Now, Press and hold the Volume Down, HOME and Power ON button at the same time. You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears. If you can’t get into it, repeat the 3-button combination again and again.
galaxy-s7-download-mode

Run and Configure Odin3 Flasher

Run Odin3 flasher program. In Odin window DO NOT tick the option box that says ‘Re-Partition’. Leave ‘Auto Reboot’ and ‘F.Reset Time’ check-marked by default.

Add the firmware binary files to their designated slots in Odin such as: the “BL” (bootlooder) file goes to the “BL button/slot“, same goes about the “AP” (phone), “CP” (modem) and the “CSC” (consumer code) files. Once loaded, you need to wait for a while as Odin3 will check the files compatibility and authenticity.

Here are the line-up of which goes on Odin buttons.
BL_G935UUEU4APL4_CL9978521_QB11855894_REV02_user_low_ship_MULTI_CERT.tar
AP_G935UUEU4APL4_CL9978521_QB11855894_REV02_user_low_ship_MULTI_CERT.tar
CP_G935UUEU4APL4_CL9978521_QB11855894_REV02_user_low_ship_MULTI_CERT.tar
CSC_G935UUEU4APL4_CL9978521_QB11855894_REV02_user_low_ship_MULTI_CERT.tar

galaxy-s7-odin3-11-firmware-installation

In addition, in stock firmware packages you may find two CSC files. The one that says “CSC_G930U,” while the other one also says “Home_CSC_G930U“. Both were exactly the same thing and will wipe your data cache.  The only differences in the configuration is that the former may include some hidden system images or it’s the full packaged, while the latter has not. That is why you should backup your important files first before flashing the stock firmware.

I highly recommended using the CSC_G930U version instead of the Home_CSC_G930U. This is the manual installation method and it’s not the usual Over-The-Air (OTA) update, which is basically we are trying to install a much cleaner and much fresher firmware. Also performing a full wipe and factory data reset is highly recommended in the process.  With this, we can get rid of lag issues here and there once after the firmware installation. Have you ever encountered about the  phone’s sluggish issues after a OTA update? Those were commonly caused by lack of performing a Full Wipe/Factory Data Reset once after taking the OTA update.

Connect the Galaxy S7 edge G935U into the computer

Connect the Galaxy S7 edge G935U to the computer using the supplied USB data cable. In Odin window, the ID: COM box will turn to a bluish color when the phone is properly connected and it’s an indication that it’s recognized with Odin. It also states as “Phone Added! in the log-cat.

Begin flashing the stock firmware

When all is set and you are ready into flashing just simply tick the ‘START’ button located at the lower part of Odin.

Avoid interrupting the process

DO NOT disconnect nor do anything when the phone is already in download mode and flashing status. You’ll messed up the phone if you accidentally interfere the installation process. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completed. However, if you get failed errors, check the USB connection condition, repeat the whole process or read the troubleshooting section below.

Wait until it says Pass!!

Odin3 will display a message that says “PASS!” when the process finishes. Wait until the phone completely reboots, then unplug it from the computer. However, if you might get the error message “FAILED!” you may check the troubleshooting procedures down below.

Troubleshooting if and when firmware flashing failed

Do performing factory reset after flashing is necessary when the device previously runs on any modified ROM and unofficial firmware images?

This process is optional, but this method can get rid of the unwanted bootloop, rebooting issues, freezes and lag issues after the new firmware installation.

Press and hold Volume Up+ Home+Power button, then select the Wipe Data/Factory Reset, to gain a fresh firmware installed.

Odin keep on failing and I’ve tried everything from A to Z but still nothing works. What else can you suggest?

You may have attempted rolling back to an older firmware version. Noting that newer updates will not allow you to downgrade to an older firmware version.  This is why Samsung and Google frequently released the Android security patches in a monthly basis. You must carefully keep an eye of each firmware build version. Please check back my insights about the stock firmware above.

Also,  if you’ve use the stock firmware to unroot and or restoring back from a modified system images but cannot get through the during the flashing and you get Odin3 fail error, you may first sort  things out like what root kernels and custom ROM, and any modified system images you have previously used before and try to find an answer to why it causes a flashing failure. Sometimes the problem is not on the stock firmware but lies in the modified system image you’ve used that causes the problem of not letting it through pass in Odin3.

If you have something to add and or in need for my assistance, just drop it on the comment form below.

Leave a Reply

Your email address will not be published. Required fields are marked *