New 4.4.2 update build I545VRUFNK1 Verizon Samsung Galaxy S4 SCH-I545. The I545VRUFNK1 firmware update might brings several bug-fixes to the previous I545VRUFNG6 4.4.2 update that has been reported causing a constant reboot, and extreme battery draining problem. The I545VRUFNK1 has not yet officially announced either from Samsung and Verizon’s support pages, but it’s now officially available and can be seen via Samsung Kies. It might be push officially via Over-the-air very soon, as the update seems very important to many Verizon Galaxy S4 users who had been waited for about a month now since October.
So, to those who can’t wait much longer and might want to give it a try now, you can grab the original I545VRUFNK1 4.4.2 Stock Firmware that has been pulled-down from Kies firmware server earlier. But then again this method are for advanced users only that exactly knows the tinkering thing of the phone such as rooting. Those who did no touched their phone and currently running the official I545VRUFNG6 4.4.2, you might wanna wait the OTA update that will be deliver to you from Verizon or try to manually check the update using Kies.
Here are the Technical details of I545VRUFNK1 4.4.2 update;
Device: Samsung Galaxy S4
Model number: SCH-I545
Android version: 4.4.2
Baseband version: I545VRUFNK1
Kernel version: 3.4.0-2415818
Build number: KOT49H.I545VRUFNK1
How to Install I545VRUFNK1 4.4.2 Stock Firmware on Samsung Galaxy S4 SCH-I545
Again, the I545VRUFNK1 is a Verizon Galaxy S4 Stock firmware, meaning it can be used exclusively for Verizon Galaxy S4 SCH-I545 phone only. Do not install it or even try to play it around with other variants like T-Mobile SGH-M919, AT&T SGH-I337, Sprint SPH-L720, and international variants such as GT-I9500 and GT-I9505.
FAQ’s before you install the I545VRUFNK1 4.4.2 Verizon Galaxy S4 Stock Firmware
Will this trip KNOX warranty void flag counter to 0×1?
Nup, this is an official and signed firmware from Samsung, so flashing official firmware will not trip KNOX.
My Samsung Galaxy S4 SCH-I545 is rooted, will I lose root?
If your device is currently rooted you will lose root after flash, but you can still root it again anytime you want.
Disclaimer: Use of this method is solely at your own risk! Please proceed with precautions, for we will not take any responsibility if anything happens to your device by using this guide.
• Make sure to recharge your Samsung Galaxy S4 SCH-I545 is or at-least still have around 40% remaining battery power.
• Stock Firmware packages comes in two formats the ‘Full-Wipe’ (delete your stored data after flashing) and the ‘Non-Wipe’ (it doesn’t delete your stored data) but it is highly recommended to make a back up all important files stored from your phone’s internal memory – contacts, messages, etc. before flashing no-matter if it is Full-WIpe or Non-Wipe, just to be safe and ensure that your stored data are in safe if something went wrong during the flashing process.
• Use a PC or laptop that runs in Windows OS, with a good and perfectly working USB serial port. Odin will not work on MAC OS.
• Use the supplied USB cable for your Samsung Galaxy S4 SCH-I545.
• Enable USB debugging from your phone’s settings – Settings>>About Phone>> then scroll down to the build number and tap that number for around 7-times ’til the Developer option appear.
• Ensure that KIES is closed and not running in the system tray! Kies and Odin are both created by Samsung but Kies will interrupt and doesn’t like Odin, it will block you from flashing.
Important Note: Always use the latest Samsung Galaxy S4 SCH-I545 Stock Firmware base on latest software update releases. Check your current firmware build number before installing this stockfirmware below. The Android 4.4.2 firmware has a protected bootloader that might cause issues when you try to downgrade to the old software updates. This also applies if you have planned to root and installs a custom recovery and or any unsigned firmware once you are on 4.4.2 KitKat, so please be aware with that.
Download the I545VRUFNK1 4.4.2 stock firmware:
SCH-I545 Verizon – I545VRUFNK1 Stock Firmware Download – (link)
Install the Samsung Galaxy S4 SCH-I545 USB driver
If ever you have no Kies installed in your computer you must install the USB Driver first to get rid of flashing failures. You may also need to extract the downloaded file which is packed in zip or rar files, so that you’ll get the tar.md5 file.
Run and Configure Odin
Run Odin downloader Odin3_v3.09 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘Phone Bootloader Update’ (only if your device runs on 4.3) , ‘AUTO-REBOOT’ and ‘F.RESET TIME’ checkboxes must be checked. Only the ‘RE-PARTITION’ is unchecked.
Reboot your Samsung Galaxy S4 SCH-I545 into Download Mode
To reboot the Samsung Galaxy S4 SCH-I545 into download mode , you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.
You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”
Connect your Phone to PC
Once you already reboot the phone in download mode, simply connect the phone to your PC or laptop USB.
In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin. Your COM port number might be different from mine. If you do not see a COM port number then there’s something missing or wrong. You may read again from the top of this post.
Load the stock I545VRUFNK1 4.4.2 Verizon Galaxy S4 Stock Firmware Package.
The stock firmware is pack in a single .tar.md5 file only. Now, you need to just simply click on the AP button, then browse to the folder where the file you have previously extracted and then select and load it.
Start the installation of the stock firmware
Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock ROM. Do not ever interrupt the flashing process, such as disconnecting the cable or turning off the device. Just wait until it completely finish.
Wait until you see the PASS!! message
When the Stock Firmware installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing was already finish, and on the log box it says “All threads completed (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s about time to remove it from PC or laptop USB connection.
Confirm if you successfully installed the stock firmware
Go to Settings>About Phone>Firmware info.
Possible errors that you may encountered, this is based on my own experience while flashing stock firmware on Samsung Android devices. These are just a few hints on how to resolve it.
Q: I got an error message that says “Set-up connection Failed” ?
A: 1. Check your USB connection from the phone to PC,
2. Connect to another PC USB port
3. Check and or try to another USB cable
4. Re-install the USB driver.
Q: Odin just suddenly stuck in the middle of nowhere while in flashing progress, it isn’t responding at all?
A: Check for possible program that might interrupt the process, like disabling the anti-virus and closing any running programs. Also try to use another computer or laptop,
Q: I experienced bootloop or the phone just stuck on Welcome Logo (phone always stop at bootanimation) and it won’t boot normally?
A: This eventually happens if your device came from custom firmware but you can fix it via recovery mode option, do this:
Boot in recovery mode
1. Press and hold Volume Up, Home and Power button.
2. Use volume keys to select, Up and Down and Power or Home key to select the option
3. Select Wipe Data/Factory Reset using the Home button.
4. Next select the Wipe Cache Partition
5. Lastly, select Reboot System Now to reboot your Samsung Galaxy S4