Install I9505XXUEMJ7 Official Android 4.3 Galaxy S4 GT-I9505 Snapdragon (Updated)

Samsung’s new official Android 4.3 update releases for Samsung Galaxy S4 GT-I9505 dubbed as I9505XXUEMJ7 firmware build numbers. This update has started rolling out in Italy, Baltic States, Czech Republic and other select countries in Europe. The I9505XXUEMJ7 has the same features from earlier Germany Android 4.3 update build I9505XXUEMJ5, though the ‘UEMJ7’ gathers a much smaller changelist score but  it comes with a newer modem or baseband version that especially built for those mentioned countries. When we talk about modem, modem is based on your country location and carrier providers. This specifically built to improved connectivity, bug-fixes and among other enhancements.

Again, Android 4.3 now equipped with KNOX security apps,Samsung Galaxy Gear Smartwatch functionally support and all other 4.3 stuff, including the new camera improvements as well the the keyboard accuracy enhancements.

Firmware details comparison I9505XXUEMJ7 and I9505XXUEMJ5

Device name: Samsung Galaxy S4 (GT-I9505)
Country: Italy
Version: Android 4.3
Build date:  October 15, 2013
Changelist: 1765174
N9005XXUEMJ7 Galaxy  S4 4.3
Device name: Samsung Galaxy S4 (GT-I9505)
Country: Germany
Android Version: 4.3 (Jelly Bean)
Build date: October 13, 2013
Changelist: 1869009
I9505XXUEMJ5 Galaxy S4 4.3

The I9505XXUEMJ7 4.3 update is now live via Samsung Kies server, as we speak,  those who are currently running on official Android 4.2.2 ‘UDMHB’ or ‘UDMH8’ can simply upgrade your Galaxy S4 device over Samsung Kies. All you need is re-charge your smartphone’s battery, and then back-up or sync your files. You may also need to download Kies if you have not installed it yet and lastly simply connect your Galaxy S4 to the computer and then perform the update. Check for this Italian blog for more Italian touch about this ‘UEMJ7’ 4.3 update.

Below, is the manual flashing procedures for advanced Galaxy S4 I9505 owners. Probably,  you may asked me; Is it this worth it to flashed if I’ve already installed the MJ5, the answer is yes, if you came from Italy and other mentioned countries (see below) but if yo u already in Germany and other Asian countries who already receives the ‘MJ5’ update the might not probably necessary. Will this trip the KNOX warranty void flag once flashed? No, this will not tripped the KNOX security platform for this a official firmware and officially signed by Samsung. You only tripped KNOX counter if you are going to install any unofficial firmwares, including custom ROMS, recovery, root kernels and any unsigned system images.

This is also useful for those Galaxy S4  that is now rooted or installed with custom firmware and wants to return back to Samsung’s official firmware since you cannot get this update over Kies anymore. Just follow this simple steps and your device will get updated to official Android 4.3 Jelly Bean.

How to manually upgrade or install the I9505XXUEMJ7 Android 4.3 Jelly Bean on Samsung Galaxy S4 GT-I9505

Again, this update is now officially release in select Europe countries. If you are in Europena regions right now, you can simply update your Galaxy S4 by checking through Samsung KIES or OTA. Below are the official I9505XXUEMJ7 stock firmware for developers and advance users, and can be flash using ODIN if their devices has been rooted and can’t get any official update anymore.

Install procedures:

Disclaimer: This guide is for advance users only, if this your first time heard about this method, make a careful research first before proceeding. We shall not be held responsible if anything happens to your device by using this guide. Proceed at your own risk!

Note: This stock firmware is compatible for all Europe unbranded or unlocked Samsung Galaxy S4 with the specification model number  “GT-I9505″ versions only.

Download the stock Android 4.3 I9505XXUEMJ7 firmware:
Italy – ITV_I9505XXUEMJ7 link
Czech Republic – ETL_I9505XXUEMJ7 link
Baltic Countries (Estonia, Latvia and Lithuania) – SEB_I9505XXUEMJ7 link

Update: More countries added;
United Kingdom/Ireland – BTU_I9505XXUEMJ7 link
Spain – PHE_I9505XXUEMJ7 link
France – XEF_I9505XXUEMJ7 link
Poland – XEO_I9505XXUEMJ7 link
Romania – ROM_I9505XXUEMJ7 link
Nordic Countries (Denmark, Finland, Iceland, Norway and Sweden) – NEE_I9505XXUEMJ7 link
Hungary – XEH_I9505XXUEMJ7 link
Bulgaria – BGL_I9505XXUEMJ7 link
Netherlands – PHN_I9505XXUEMJ7 link
Greece – EUR_I9505XXUEMJ7 link
Luxembourg – LUX_I9505XXUEMJ7 link
Slovenia – SIO_I9505XXUEMJ7 link
Slovakia – XSK_I9505XXUEMJ7 link
Southeast Europe – SEE_I9505XXUEMJ7 link
Slovakia – ORX_I9505XXUEMJ7 link
Sweden – VDS_I9505XXUEMJ7 link
Switzerland – AUT_I9505XXUEMJ7 link
Portugal – TPH_I9505XXUEMJ7 link

Note: You can also buzz us if we missed some countries, so we can add it all up here. 

Odin3_v3.09 download
Kies 3 USB Driver download

Step 2: Prepare things  as follows:
– Use a PC or laptop that runs in Windows OS, with a good and perfectly working USB serial port.
– Use the USB cable wire for your Galaxy S4.
– Make sure that your Galaxy S4 battery is fully charge.
– Back up all important files stored from your phone’s internal memory – contacts, messages, etc.
– Remember or back up the APN settings of your device.
– Enable USB debugging from your phone’s settings. Go to Settings > Applications > Development, and tick the box that says ‘Enable USB Debugging’.
– Do a “Hard Reset” if you have a lot of 3rd party applications installed from your phone, this is useful to gain a smooth flashing. (Just make sure that you already back up all your important files before resetting your device.

Step 3: Extract or unzip the downloaded stock firmware so that you’ll get the Odin flashable .tar.md5 file. Use Winzip, winrar, 7zip or any extracting tool you had in your computer.

Step 4: Run and Configure Odin
Run Odin downloader on your computer’s desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘RE-PARTITION’ is unchecked. Leave the ‘AUTO-REBOOT and ‘F.RESET TIME’  remains checked.
Now, click on the AP button, then select and load the tar file that you have previously extracted.  “I9505XXUEMJ7_I9505ITVEMJ8_I9505XXUEMJ7_HOME.tar.md5″

Odin sample only:
Android 4.3 Samsung Galaxy S4 GT-I9505 Install Odin
Step 5: Reboot the Galaxy S4 I9505 into Download Mode.
To put your Galaxy S4 I9505 in download mode, just simply switch it off then gently press and hold the “POWER, VOLUME DOWN and HOME” buttons simultaneously. You’ll be then prompted in a warning screen to continue or cancel.

Step 6: Connect the Phone to the Computer or Laptop
Once the phone screen shows in downloading mode, connect your phone to the PC with the USB cable. You’ll then notice the upper box in Odin that turns in yellow color., it also indicates the COM:ID where the device is being detected and a word “added!!’ on the log box. If somehow those things never showed up, check out the USB cable connection, read again from the top of this post.
Step 7: Flash it!
Once all set and ready, hit he “START” button to begin flashing.
Do not touch anything that might interrupt the process to avoid any fatal errors or failures, it may ruin your device if any interruption occurs while already in flashing status.

It may takes a couple of minutes or longer and it depends of your PC/laptop speeds. A word “PASS” will display in Odin once it finishes. If somehow you will not get the word “PASS” or just stuck in along time. Disconnect the phone, remove battery, re-insert it, check the USB connection, re-install the driver, disable Kies and any anti-virus. Set the phone in Download mode again, and repeat the whole procedure.

The phone will just automatically reboots if the firmware flashing successfully completes. Just wait until it boots up on the “Samsung” logo for a while then into an android update screen. If it still shows boot logo try rebooting and if it stays there, you need to wipe your phone.

Fixing possible issues after flashing like bootloops or just stuck in welcome screen logo

Boot in recovery mode – Press and hold Volume Up, Home and Power button. Use volume keys to select up and down and power or home key to select the option.

1. Select Wipe Data/Factory Reset
2. Next select the Wipe Cache Partition
3. Lastly select Reboot System Now to reboot your Galaxy S4 in Normal mode.
Confirm your fresh firmware installed by typing *#1234# or
Go to Settings>About Phone>Firmware info.
Check and reconfigure your APN settings when data networks connection issues encountered.

Change the default text to your own or desired language

The default language of this firmware varies according to which country specific software build you have installed, but it has all major languages around the world included. You can just simply change it from your device text settings.

All Included languages:

  • Catala
  • Cestina
  • Dansk
  • Deutsch (Deutschland)
  • Deutsch (Osterreich)
  • Deutsch (Schweiz)
  • Eesti
  • English (Australia)
  • English (New Zealand)
  • English (United Kingdom)
  • English (United States)
  • Espanol (Spania)
  • Espanol (Estados Unidos)
  • Euskara
  • Francais (Belgique)
  • Francais (France)
  • Galego
  • Hrvatski
  • Icelandic
  • Italiano
  • Kazakh
  • Latviesu
  • Lietuviu
  • Macedonian
  • Magyar
  • Nederlands (Belgie)
  • Nederlands (Nederland)
  • Norsk bokmal
  • Polski
  • Portugues (Brasil)
  • Portugues (Portugal)
  • Romana
  • Slovincina
  • Slovescina
  • Srpski
  • Suomi
  • Svenska
  • Turkce
  • Uzbek
  • Russian
  • Chinese
  • Korean
  • Japanese
  • others which I can’t read

You may then confirm the newly installed Jelly Bean from your device:
Go to Settings>>About Device>> Firmware info or type *#1234# and see if it’s already got the baseband  I9505XXUEMJ7 and a Android 4.3 version.  That’s it! If this helps you then simply share us some love by hitting our like and share buttons. If you also have something to add, your comments and suggestions are most welcome here.

Comments are closed.