Here is the Android 4.4.4 KitKat stock firmware build N900PVPUDNH7 for Sprint Samsung Galaxy Note 3 SM-N900P. This stock firmware is directly pulled from Samsung’s firmware untouched nor modified by any means and stays as the official 4.4.4 as it was. So you can rest assured that this will not knock-down the KNOX counter if you have keep it at the default state of “0x0”. The official Android 4.4.4 N900PVPUDNH7 brings the HD voice Icon support, Kids Mode, International Wi-Fi Calling support, Google Security Patches and updated version of the stock Apps like KNOX now bumps to the latest 2.0 version.
As far as changes we’ve noticed is the new baseband LTE capabilities that has improved a lot better than before, this is seems due to the fact that the Voice over LTE VoLTE is now supported.
Technical Details of N900PVPUDNH7
Device: Galaxy Note 3 (Sprint)
Model number: SM-N900P
Android version: 4.4.4
Baseband version: N900PVPUDNH7
Build number: KTU84P.N900PVPUDNH7
The N900PVPUDNH7 4.4.4 Changelog:
• Android 4.4.4
• HD voice Icon support
• International Wi-Fi Calling support
• Google Security Patches
• Knox 2.0
• Kids Mode
This is an update from previous 4.4.2 N900PVPUCNC5 so you will then bump to Android 4.4.4 N900PVPUDNH7 once the update has made. You may check your firmware details by heading over to Settings>>About device and then scroll down to the build number.
Again this guide is for advanced users only. If you haven’t touched your device then you should simply update officially OTA update over-the-air and even Samsung Kies 3. You will lose root once you flashed the N900PVPUDNH7 firmware but you can still root the 4.4.4 update if you need your root back.
A Reminders before Flashing N900PVPUDNH7 Stock Firmware
- Make sure that your Galaxy Note 3 battery is fully charge.
- Stock ROM packages comes in two formats the ‘Full-Wipe’ (delete your stored data after flashing) and the ‘Non-Wipe’ (it doesn’t delete your phone’s stored data) but it is highly recommended to make a back up all important files stored from your phone’s internal memory – contacts, messages, etc. before flashing no-matter if it is Full-WIpe or Non-Wipe, just to be safe and ensure that your stored data are in safe if something went wrong during the flashing process.
- Use a PC or laptop that runs in Windows OS, with a good and perfectly working USB serial port. Odin will not work on MAC.
- Use the supplied USB cable for your Galaxy Note 3.
- Enable USB debugging from your phone’s settings. Go to Settings >About Device > Settings >About Device> Look for the build number, then tap that build number for about 7-times until a message pop-up says you are now a developer.
- Ensure that KIES is closed and not running in the system tray! Kies and Odin are both created by Samsung but Kies will interrupt and doesn’t like Odin, it will block you from flashing.
- The Android 4.4.4 now comes with a new protected bootloader and will not allow you to downgrade to the old software version. Please be careful if you are planning into rooting and installing any custom recovery once you are on 4.4.4, just find the root method at XDA-developers to keep your device safe.
Very Important Note!
Once you installed and been upgraded to Android 4.4.4 Firmware N900PVPUDNH7, you should not revert back to the old software build version. The 4.4.4 KitKat updates now includes a secured bootloader that may possibly result into unwanted bricks if you downgrade. Furthermore, if future updates came around, you may not also use this firmwarefor reverting back to official stock. Instead find the original firmware that match with thatfirmware build version.
Disclaimer: Use of this guide is solely at your own risk! This isn’t the official method to update if you haven’t modified your phone in the first place.
Download the needed tools for flashing
Install the USB Driver first to get rid of flashing failures. Also need to extract the downloaded file which is packed in zip or rar files, so that you’ll get the tar.md5 file.
Installing the Full Stock 4.4.4 KitKat N900PVPUCNH7
1.) Run and Configure Odin.
Run Odin Odin3_v3.09.exe on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘RE-PARTITION’ is unchecked, only the ‘AUTO-REBOOT and ‘F.RESET TIME’ checkboxes are both remained checked.
2.) Reboot your Galaxy Note 3 into Download Mode.
To reboot the Galaxy Note 3 into download mode , you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.
You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”
3.) Connect your Phone to PC or Laptop.
Once you already reboot the phone in download mode, simply connect the phone to your PC or laptop USB.
In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin. Your COM port number might be different from mine. If you do not see a COM port number then there’s something missing or wrong. You may read again from the top of this post.
4.) Load the stock 4.4.4 N900PVPUDNH7 firmware file.
T he stock ROM is pack in One .tar.md5 file only. Now, you need to just simply click on the AP button, then browse to the folder where the file you have previously extracted and then select and load it.
5.) Start Flashing or Installing the N900PVPUDNH7 firmware.
Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stockROM.
Do not ever interrupt the phone while already in flashing progress, like disconnecting the cable or turning off the device. Just wait until it completely finish.
6.) Wait until Odin show PASS!!
When the Stock ROM installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing was already finish, and on the log box it says “All threadscompleted. (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s time to remove it from PC or laptop USB connection.
7.) Confirm if you successfully installed the stock firmware
Confirm your fresh firmware installed by typing *#1234# or
Go to Settings>About Device>Device info. (This might not work on 4.4.4 updates)
Possible errors that you may encountered, this is based on my own experience while flashing stock ROM on Samsung Android devices. These are just a few hints on how to resolved it.
Q: I got an error message that says “Set-up connection Failed” ?
A: 1. Check your USB connection from the phone to PC,
2. Connect to another PC USB port
3. Check and try to another USB cable
4. Re-install the USB driver.
Q: Odin just suddenly stuck in the middle of nowhere while in flashing progress, It isn’t responding at all?
A: Check for possible program that might interrupt the process, like disabling the anti-virus andclosing any running programs.
Try to use another PC or laptop,
Q: I experienced bootloop or the phone just stuck on Welcome Logo (phone always stop at bootanimation) and it won’t boot normally?
A: You can fix it via recovery mode option, do this:
Boot in recovery mode
1. Press and hold Volume Up, Home and Power button.
2. Use volume keys to select, Up and Down and Power or Home key to select the option
3. Select Wipe Data/Factory Reset using the Home button.
4. Next select the Wipe Cache Partition
5. Lastly, select Reboot System Now to reboot your Galaxy Note 3 in Normal mode.
From here you must have upgraded to N900PVPUDNH7 Official 4.4.4 KitKat upgrade on your Sprint Galaxy Note 3 4.4.4 SM-N900P.
That’s it! Any further questions, just drop it on our social network pages.