Rogers,Telus,Bell Galaxy Note 4 SM-N910W8 Stock Firmware

Download Rogers, Bell, Telus Samsung Galaxy Note 4 SM-N910W8 original stock firmware. These firmware files are for Android ninjas, developers, and advanced users. These are all full factory firmware files, it’s all untouched, unmodified and remained as official as it was. So you can rest assured that once you flashed one of these original firmware packages it will not knock down the KNOX counter of your device. It was all directly pulled from OTA updates and are all flashable firmware packaged that can be loaded onto Odin.

Canada’s Samsung Galaxy Note 4 SM-N910W8 Firmware

Marshmallow Android 6.0.1 Firmware Builds

 Version  Android version  Release date  Stock firmware
 N910W8VLS1DPK1  6.0.1  November 29, 2016
 N910W8VLU1DPE2  6.0.1 May 24, 2016

Android 5.1.1 & 5.0.1 Lollipop Firmware Builds

Downgrade from Android 6.0.1 Marshmallow back to Android  5.1.1 KitKat:
The Android 6.0.1 Marshmallow can be downgraded to 5.1.1 KitKat, but you must be aware that the newer updates is built with new Android security patches.

Build version Android version Release date Stock firmware
N910W8VLU1COK3 5.1.1 Lollipop 2015 November Telus –  (link)
Rogers –  (link)
Wind –  (link)
Fido –  (link)
Koodo –  (link)
Videotron –  (link)
N910W8VLU1CO14 5.1.1 Lollipop 2015 October Telus –  (link)
Bell –  (link)
Wind –  (link)
Virgin-Mobile-  (link)
Koodo –  (link)
Videotron –  (link)
N910W8VLU1BOE2 5.0.1 Lollipop 2015 August Telus –  (link)
Bell –  (link)
Wind –  (link)
Fido –  (link)
Koodo –  (link)
Videotron –  (link)
N910W8VLU1BOE1 5.0.1 Lollipop 2015 May Telus –  (link)
Bell –  (link)
N910W8VLU1BOC4 5.0.1 Lollipop 2015 March Rogers –  (link)
Telus –  (link)
Bell –  (link)
Other carrier:
Wind –  (link)
Virgin –  (link)
Eastlink –  (link)
Koodo –  (link)
Videotron –  (link)
Sasktel –  (link)

Android 4.4.4 KitKat Firmware Builds

Downgrade from 5.0.1 Lollipop back to 4.4.4 KitKat:
Some new Lollipop 5.0.1 update comes with a secured  “bootloader”, so downgrading from Android 5.0.1 and returning back to Android 4.4.4  is not possible anymore.

Build version Android version Released date
N910W8VLU1AOA1 4.4.4 Kit Kat 2015 January
N910W8VLU1ANJ3 4.4.4 Kit Kat 2014 October
N910W8VLU1ANIH 4.4.4 Kit Kat 2014 September

Canadian Galaxy Note 4 SM-N910W8 Firmware Build Details Screenshots.

Android 5.0.1 Lollipop update version N910W8VLU1BOC4
Android 5.0.1 Lollipop update version N910W8VLU1BOC4

Odin Flasher and USB Driver

Odin3_v3.10 Here
USB Driver Here

Important Note: These stock firmware packages are exclusively for Canadian Samsung Galaxy Note 4 SM-N910W8 only. Noting that each firmware build version starts with “N910W8” which actually should match to the phone’s model number. Do not ever try use these firmware files in case you don’t really exactly knows where and how to use it. Use of these firmware files is entirely at your own risk! The list might be incomplete. If you couldn’t find what you’re looking for, then you are welcome to find it somewhere else. I’ve just put all up all together in one single page, as these files are very useful to fix the Samsung Galaxy Note 4 SM-N910W8 phone if somehow one have messed-up from rooting and installing a modified firmware.

How and when a stock firmware to be use for?
Fix a bricked phone either soft bricked or hard bricked but depends on phone status as long as the phone can reboot into download mode.
· 100% completely removed root as it cleans and wipes out any modification inside the system tray.
· Restore back the phone from custom ROM to official firmware.
· Manually upgrades from 4.4.4 to 5.0.1 updates.
· Manually downgrade from 5.0.1 to 4.4.4 only. But not applicable to the 5.1.1 updates due to the new policy guidelines which basically has now with a locked bootloader.
· Manually pull and dump system files such as Apps, Kernel, Boot image, Stock Recovery, CSC, Modem, Radio Interface Layer (RIL) etc. (Developers method)

How to Install Back Bell, Rogers, Telus Samsung Galaxy Note 4 SM-N910W8 Full Stock Firmware

Install the USB driver.
This process cannot be done unless your Galaxy Note 4 is recognized by the computer. So make sure to install the USB driver first.Unzip the firmware fileDecompress the firmware file by using Winzip, 7zip, Winrar.Run and Configure OdinRun Odin downloader Odin3_v3.10.6 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the “RE-PARTITION” is unchecked, only the “AUTO-REBOOT” and “F.RESET TIME” checkboxes are both remained checked.
install stock firmware galaxy note 4 edge

Reboot your Galaxy Note 4 N910W8 into Download Mode.
To reboot the Galaxy Note 4 into download mode, you need to turn the power off first. Once it is completely turned off, just press and hold the Volume Down, Home and the Power/Lock button simultaneously. It should then prompt you into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s (Downloading.. Do not turn off target!!)

Galaxy Note 4 edge download mode

Connect your Galaxy Note 4 into your Computer.
As soon as you reboot the phone in download mode, simply connect the phone to your PC or laptop USB. In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin.Load the Galaxy Note 4 SM-N910W8 Stock Firmware package.
The stock ROM packs in a single .tar.md5 file only. You just need to simply click on the AP button, then browse to the folder where the file you have previously extracted and then select and load it. Like for example on 5.0.1 firmware, it may read like this; “N910W8VLU1BOC4_N910W8VLU1BOC4_HOME.tar.md5″

Start Installing the Stock Firmware.
Once all set and ready, fire-up the “START” button in Odin to begin flashing the stock ROM. Do not ever interrupt the phone while already in flashing progress, like disconnecting the cable or turning off the device. Just wait until it completely finishes.

Wait until Odin shows PASS!!
When the Stock ROM installation successfully completes, you will then see a word “PASS” in Odin. That simply indicates that the flashing was finished, and on the log box it says “All threads completed. (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s about time to disconnect it from your computer.

Confirm if you successfully installed the stock firmware by going into Apps > Settings > About device.