Sprint Galaxy Note Edge SM-N915P Stock Firmware

Download Sprint Samsung Galaxy Note Edge SM-N915P original stock firmware. These firmware files are for developers, advanced users, enthusiast, and alike. These are all full factory firmware files, it’s all untouched, unmodified and remained as official as it was. So you can rest assured that once you flashed one of these original firmware packages it will not knock down the KNOX counter of your device. It was all directly pulled from OTA updates and are all flashable firmware packaged that can be loaded onto Odin3_v3.10.6.

Sprint Galaxy Note Edge SM-N915P Stock Firmware Build version

Android 6.0.1 Marshmallow OTA Updates

Build version Android version Build date Stock
N915PVPU5DQI5 6.0.1 Marshmallow 2017 August (link)
N915PVPS4DQG1 6.0.1 Marshmallow 2017 July (link)
N915PVPS4DQF1 6.0.1 Marshmallow 2017 June (link)
N915PVPS4DQE1 6.0.1 Marshmallow 2017 May (link)
N915PVPS4DQC1 6.0.1 Marshmallow 2017 April (link)
N915PVPS4DQB3 6.0.1 Marshmallow 2017 March (link)
N915PVPS4DQA1 6.0.1 Marshmallow 2017 February (link)
N915PVPS4DPL1 6.0.1 Marshmallow 2016 December (link)
N915PVPS4DPK1 6.0.1 Marshmallow 2016 November (link)
N915PVPS4DPJ1 6.0.1 Marshmallow 2016 October (link)
N915PVPS4DPH3 6.0.1 Marshmallow 2016 September (link)
N915PVPU4DPF3 6.0.1 Marshmallow 2016 August (link)
N915PVPU4DPE2 6.0.1 Marshmallow 2016 May (link)
N915PVPU4DPD1 6.0.1 Marshmallow 2016 April (link)

Android 5.0.1 – 5.1.1 Lollipop, Android 4.4.4 KitKat OTA Updates

Build version Android version Build date Stock
N915PVPS4COK2 5.1.1 Lollipop 2015 November (link)
N915PVPU4COJ5 5.1.1 Lollipop 2015 October (link)
N915PVPU4COG1 5.1.1 Lollipop 2015 August (link)
N915PVPU4COFE 5.1.1 Lollipop 2015 June (link)
N915PVPU3BOF6 5.0.1 Lollipop 2015 June (link)
N915PVPU2BOC8 5.0.1 Lollipop 2015 April (link)
N915PVPU1ANJL 4.4.4 Kit Kat 2014 November (link)
N915PVPU1ANK1 4.4.4 Kit Kat 2014 October (link)

Important Note: These stock firmware packages are exclusively for Sprint Samsung Galaxy Note Edge SM-N915P only. Noting that each firmware build version starts with “N915P” which actually should match to the phone’s model number. Do not ever try use these firmware files in case you don’t really exactly knows where and how to use it. Use of these firmware files is solely at your own risk! The list might be incomplete. If you couldn’t find what you’re looking for, then you are welcome to find it somewhere else. I’ve just put all up all together in one single page, as these files are very useful to fix yours as well as my Sprint Samsung Galaxy Note Edge SM-N915P phone if somehow we both messed-up from rooting and installing a modified firmware.

Is it possible to downgrade Sprint Galaxy Note Edge from Android 5.1.1 and roll back to Android 5.0.1 or 4.4.4?

No. The Android 5.1.1 comes with bootloader prior for downgrading. Doing so may just fail upon flashing via Odin. I tried it several times just to confirm but got no luck out of it. So please be aware with that as downgrading cannot be done from now on, this may be due to the new security policy guidelines in the US.

Sprint Galaxy Note Edge SM-N915P Firmware Build Details Screenshots

How to use the Stock Firmware?

· Fix a bricked phone either soft bricked or hard bricked but depends on phone status as long as the phone can reboot into download mode.
· 100% completely removed root as it cleans and wipes out any modification inside the Android system tray.
· Restore back the phone from custom ROM to official firmware.
· Manually upgrades from 4.4.4 to 5.0.1 updates.
· Manually pull and dump system files such as Apps, Kernel, Boot image, Stock Recovery, CSC, Modem, Radio Interface Layer (RIL) etc. (Developers method)

Tools for flashing stock firmware

Odin3_v3.10.6 or Odin3_v3.10.7
USB Driver

How to Unroot Sprint Samsung Galaxy Note Edge SM-N915P and Restore it Back to Official Firmware

Install the USB driver

This process cannot be done if your Galaxy Note Edge is not recognized by the computer. So make sure to install the USB driver first.

Unzip the firmware file

Decompress the firmware file by using Winzip, 7zip, WinRAR.

Run and Configure Odin

Run Odin downloader Odin3_v3.10.6 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘RE-PARTITION’ is unchecked, only the ‘AUTO-REBOOT and ‘F.RESET TIME’ checkboxes are both remained checked.
install stock firmware galaxy note 4 edge

Reboot your Galaxy Note Edge N915P into Download Mode

To reboot the Galaxy Note Edge into download mode, you need to turn the power off first. Once it is completely turned off, just press and hold the Volume Down, Home and the Power/Lock button simultaneously. It should then prompt you into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”
Galaxy Note 4 edge download mode

Connect your Galaxy Note Edge into your Computer

As soon as you reboot the phone in download mode, simply connect the phone to your PC or laptop USB. In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin. Your COM port number might be different from mine. If you do not see a COM port number then there’s something missing or wrong. You may read again from the top of this post.

Load the Galaxy Note Edge SM-N915P Stock Firmware package

The stock ROM packs in a single .tar.md5 file only. You just need to simply click on the AP button, then browse to the folder where the file you have previously extracted and then select and load it. Example: “N915PVPU2BOC8_N915PSPT2BOC8_HOME.tar.md5″

Start Installing the Stock Firmware

Once all set and ready, fire-up the “START” button in Odin to begin flashing the stock ROM. Do not ever interrupt the phone while already in flashing progress, like disconnecting the cable or turning off the device. Just wait until it completely finishes.

Wait until Odin shows PASS!!

When the Stock ROM installation successfully completes, you will then see a word “PASS” in Odin. That simply indicates that the flashing was finished, and on the log box it says “All threads completed. (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s about time to disconnect it from your computer. Confirm if you successfully installed the stock firmware by going into Apps>Settings>About device.