T-Mobile Galaxy Note 4 SM-N910T Stock Firmware

T-Mobile Samsung Galaxy Note 4 SM-N910T original stock firmware. These firmware files are for developers, advanced users, enthusiast, and alike. These are all full factory firmware files, it’s all untouched, unmodified and remained as official as it was. So you can rest assured that once you flashed one of these original firmware packages it will not knock down the KNOX counter of your device. It was all directly pulled from OTA updates and are all flashable firmware packaged that can be loaded onto Odin3_v3.10.6.

SM-N910T T-Mobile Galaxy Note 4 Firmware

Android 6.0.1 Marshmallow Firmware Updates

Build version Android version Build Date Stock
N910TUVU2EQI2 6.0.1 Marshmallow 2017 August (link)
N910TUVS2EQG1 6.0.1 Marshmallow 2017 July (link)
N910TUVS2EQE2 6.0.1 Marshmallow 2017 May (link)
N910TUVU2EQC1 6.0.1 Marshmallow 2017 March (link)
N910TUVS2EQB1 6.0.1 Marshmallow 2017 February (link)
N910TUVS2EPK2 6.0.1 Marshmallow 2016 November (link)
N910TUVU2EPJ2 6.0.1 Marshmallow 2016 October (link)
N910TUVS2EPG2 6.0.1 Marshmallow 2016 August (link)
N910TUVU2EPE3 6.0.1 Marshmallow 2016 May (link)

Android 5.1.1 & 5.0.1 Lollipop Firmware Updates

Build version Android version Build Date Stock
N910TUVU2DOK2 5.1.1 Lollipop 2015 November (link)
N910TUVU1COG2 5.0.1 Lollipop 2015 August (link)
N910TUVU1COD6 5.0.1 Lollipop 2015 April (link)

Android 4.4.4 KitKat Firmware Updates

Build version Android version Build Date Stock
N910TUVU1ANK4 4.4.4 Kit Kat 2014 November (link)
N910TUVU1ANJ7 4.4.4 Kit Kat 2014 October (link)
N910TUVU1ANIH 4.4.4 Kit Kat 2014 September (link)

SM-N910T3 T-Mobile Galaxy Note 4 Firmware

Android 6.0.1 Marshmallow Firmware Updates

Build version version Android version Build Date Stock
N910T3UVS3EQB1 6.0.1 Marshmallow 2017 February (link)
N910T3UVS2EPK2 6.0.1 Marshmallow 2016 November (link)
N910T3UVU3EPJ2 6.0.1 Marshmallow 2016 November (link)
N910T3UVS2EPG2 6.0.1 Marshmallow 2016 August (link)
N910T3UVU1EPE3 6.0.1 Marshmallow 2016 May (link)

Android 5.1.1 & 5.0.1 Lollipop Firmware Updates

Build version Android version Build Date Stock
N910T3UVU1DOK2 5.1.1 Lollipop 2015 November (link)
N910T3UVU1DOG1 5.1.1 Lollipop 2015 August (link)

Downgrade from 5.0.1 Lollipop back to 4.4.4 KitKat:

The 5.0.1 “bootloader” hasn’t been locked and still matches to the previous 4.4.4. Therefore, downgrading from Android 5.0.1 (N910TUVU1COD6) and returning back to Android 4.4.4 (N910TUVU1ANK4) is still possible at this time being.

Important Note: These stock firmware packages are exclusively for T-Mobile Samsung Galaxy Note 4 SM-N910T only. Noting that each firmware build version starts with “N910T” which actually should match to the phone’s model number. Do not ever try use these firmware files in case you don’t really exactly knows where and how to use it. Use of these firmware files is entirely at your own risk! The list might be incomplete. If you couldn’t find what you’re looking for, then you are welcome to find it somewhere else. I’ve just put all up all together in one single page, as these files are very useful to fix yours as well as my T-Mobile Samsung Galaxy Note 4 SM-N910T phone if somehow we both messed-up from rooting and installing a modified firmware.

T-Mobile Galaxy Note 4 SM-N910T Firmware Build Details Screenshots

How and when a stock firmware can be use for?

· Fix a bricked phone either soft bricked or hard bricked but depends on phone status as long as the phone can reboot into download mode.

· 100% completely removed root as it cleans and wipes out any modification inside the system tray.

· Restore back the phone from custom ROM to official firmware.

· Manually upgrades from 4.4.4 to 5.0.1 updates.

· Manually downgrade from 5.0.1 to 4.4.4 only. But not applicable to the 5.1.1 updates due to the new policy guidelines which basically has now with a locked bootloader.

· Manually pull and dump system files such as Apps, Kernel, Boot image, Stock Recovery, CSC, Modem, Radio Interface Layer (RIL) etc. (Developers method)

Odin Flasher versions

Odin3_v3.10.6 Download

USB Driver versions

USB Driver (5.1.1/6.0.1) Download
USB Driver (4.4/5.0)

How to Install Back T-Mobile Samsung Galaxy Note 4 SM-N910T to Full Stock Firmware

Install the USB driver

This process cannot be done unless your Galaxy Note 4 is recognized by the computer. So make sure to install the USB driver first.

Unzip the firmware file

Decompress the firmware file by using Winzip, 7zip, Winrar.

Run and Configure Odin

Run Odin downloader Odin3_v3.10.6 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘RE-PARTITION’ is unchecked, only the ‘AUTO-REBOOT and ‘F.RESET TIME’ checkboxes are both remained checked.
install stock firmware galaxy note 4 edge

Reboot your Galaxy Note 4 N910T into Download Mode

To reboot the Galaxy Note 4 into download mode, you need to turn the power off first. Once it is completely turned off, just press and hold the Volume Down, Home and the Power/Lock button simultaneously. It should then prompt you into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”
Galaxy Note 4 edge download mode

Connect your Galaxy Note 4 into your Computer

As soon as you reboot the phone in download mode, simply connect the phone to your PC or laptop USB. In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin.

Load the Galaxy Note 4 SM-N910T Stock Firmware package

The stock ROM packs in a single .tar.md5 file only. You just need to simply click on the AP button, then browse to the folder where the file you have previously extracted and then select and load it. Like for example on 5.0.1 firmware, it may read like this; “N910TUVU1COD6_N910TTMB1COD6_HOME.tar.md5″

Start Installing the Stock Firmware

Once all set and ready, fire-up the “START” button in Odin to begin flashing the stock ROM. Do not ever interrupt the phone while already in flashing progress, like disconnecting the cable or turning off the device. Just wait until it completely finishes.

Wait until Odin shows PASS!!

When the Stock ROM installation successfully completes, you will then see a word “PASS” in Odin. That simply indicates that the flashing was finished, and on the log box it says “All threads completed. (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s about time to disconnect it from your computer. Confirm if you successfully installed the stock firmware by going to Go to Settings>About Phone>Firmware info.

Reconfigure APN Settings

If just in case you might lose the default APN settings that result to signal issues you can manually reconfigure it. This setting is not the default one but the ones that bypass T-Mobile’s VPN Connection Restriction. This is the APN settings that have been also used for the “WiFi Tether Router APP”.

T-mobile Galaxy Note edge APN settings 1T-mobile Galaxy Note edge APN settings 2

Name: T-Mobile US LTE VPN

APN: fast.t-mobile.com

Proxy: ~Not set~

Port: ~Not set~

Username: ~Not set~

Password: ~Not set~

Server: ~Not set~

MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc

Multimedia message proxy: ~Not set~

Multimedia message port: ~Not set~

MCC: 310

MNC: 260

Authentication type: ~Not set~

APN type: default,mms

APN protocol: IPv4/IPv6

APN roaming protocol: IPv4

Instructions for editing APN:

1. Go into Menu setting, Menu>> Settings>>Wireless and Networks>> Mobile Networks>>Access Point Names

2. In order to enter a new APN, hit the left menu key. Pick New APN, then enter your APN setting as listed above. Then lastly hit Menu again and save!