Install I9300XXDLJ4 Samsung Galaxy S3 Official 4.1.1 Jelly Bean Update

Finally!  The Jelly Bean Android 4.1.1 for United Kingdom’s Samsung Galaxy S3 unbranded BTU is out now. It has unique firmware build number I9300XXDLJ4 and seems a much more fresher build as of October 19, 2012. The modem is still the same from European JB updates I9300XXDLID. So, just check it out and be the first to try it out. UK’s unbranded Galaxy S3’s Jelly Bean update took a few days delayed, it was supposedly expected to receive first. Anyway,  this is a much stable build than others. Some noticeable main features of Jelly Bean is the S-Voice and Google Now are  now supported and works perfect.

Firmware build: JRO03C.I9300XXDLJ4 Android 4.1.1 Jelly Bean

This is the 5th Jelly Bean build officially release in Europe from I9300XXDLIB, I9300XXDLIH, I9300XXDLJ1 and the I9300XXDLJ2 before this.

Device: Samsung Galaxy SIII GT-I9300 (unbranded, unlocked, SIM-Free)
Country: United Kingdom
Android Version: 4.1.1
PDA: I9300XXDLJ4
CSC: I9300OXADLJ4
MODEM: I9300XXDLID
Kernel Version: 3.0.31-368423 / se.infra@SEP-78 #1 / SMP PREEMPT Fri Oct 19 18:17:48 KST 2012
Build Number: JRO03C.I9300XXDLJ4
Build Date: Oct. 19, 2012

Download: Galaxy S3 GT-I9300 Stock Firmware

How to install I9300XXDLJ4 Android 4.1.1 Jelly Bean

This update is officially release  in UK only via Kies/OTA, outside United Kingdom users of unbranded Galaxy S3 cannot get this update. You must wait until Samsung distribution reaches in your areas.  But for advance users, who used and previously installed leaks and other countries Jellybean firmware you can try it out now, using the I9300XXDLJ4 stock ROM.

Odin flashing procedure I9300XXDLJ4 4.1.1 Jelly Bean Firmware

This is a manual upgrading using the I9300XXDLJ4 stock ROM, this is the same firmware released by Samsung via Kies or OTA, but just being pulled from Samsung server so that advance users and 3rd-party developers can use it and or give it a try.

Disclaimer: Proceed at your own risk! We shall not be held responsible if something happens on your device by using this guide.

Grab Odin flasher Odin3_v3.07 link and USB driver.

Grab the Jelly Bean stock ROM:
United Kingdom – I9300XXDLJ4_BTU 4.1.1
Spain – I9300XXDLJ4_PHE 4.1.1
Germany – I9300XXDLJ4_MBC 4.1.1
Italy– I9300XXDLJ4_ITV 4.1.1
Greece – I9300XXDLJ4_EUR 4.1.1
Russia – I9300XXDLJ4_SER 4.1.1
Czech Republic – I9300XXDLJ4_XEZ 4.1.1

Prepare things as follows:
– Fully re-charge your phone’s battery.
– Back up all important files store from your phone’s internal memory. although this will not wipe the data after installation.
– Use a good working USB cable wire,
– A computer laptop runs in Windows OS, this will not work on MAC, Samsung and Apple are not friends.
– Disable Kies and any open programs that might interrupt the process.

Step 1: Install the USB driver and Extract the downloaded I9300XXDLJ4 stock ROM

Odin can’t read the file if not extracted, so you need to “unzipped” it first, so that you’ll get the .tar.md5 binary file.

Step 2: Run and configure Odin

Just right-click Odin3_v3.07.exe and run as administrator, then configure its settings:
DO NOT Check This!!!!! “RE-PARTITION”
check these boxes “AUTO-REBOOT” and “F-RESET TIME”

Step 3: Load the binary file on PDA button

Click on the PDA button then browse to the folder where you extracted the stock ROM then select and load it.
I9300XXDLJ4_I9300OXADLJ4_I9300XXDLID_HOME.tar.md5

Step 4: Reboot the phone in download mode

To reboot the Galaxy S3 into  download mode , you need to turn the power off.  After it completely shut down,  just  press and hold the Volume Down key,  Home button and the Power ON/OFF button simultaneously.
Samsung Galaxy S3 Download Mode buttons Volume Down,HOME,Power keys
You should then prompted into a warning screen and asking you  to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”

Step 5: Connect the phone to PC

When the phone is in the Download Mode screen, connect it to the computer using the USB cable, you should see an ID:COM port number and it turn to a blue color – as an indication that the phone is already recognized by Odin. Also a word “Added” on Odin’s log box”

Step 6: Hit the “START’ button

Once all properly set and ready to flash, just hit the “START” button below odin’s window.

Step 7: Wait for a word “PASS’

At the end of the flashing process, a word “PASS” will display and this means that the installation is already finishes.
Juts wait until the phone, completely normally reboots, then remove it from PC connection.

You may then confirm the newly installed Jelly Bean from your Samsung Galaxy S3:
About>Settings> Firmware info or type *#1234# and see if it’s already I9300XXDLJ4  firmware build.

If you already got this update just share it to us your impressions  on how does firmware works like performance and any other issues you may encounter.

18 comments

  1. Thanks for a very clear and concise article. I downloaded the update initialy via Kies but found that when I tried to enter Settings/more settings I got “unfortunately, Settings has stopped” So I tried it again via Odin with your method and got the same problem. Anybody any ideas please?

    1. Did you perform factory data reset? try to wipe, but back up all important files first before doing it.

    2. Thanks for your input and you were quite correct. A factory reset did it. However when I reinstalled all my applications from a back up it happened again. Another reset and individually installing the applications sorted it. Thanks again.

    3. Whoops. The problem turned out to be, having backed up with Backup Pro.before the upgrade. I restored everything after the upgrade. Own goal. Shouldn’t have let it restore settings. You live and learn. I hope this helps somebody else.

    1. You need to update Kies from time to time. Kies work on ICS and probably will not work on JB for now, until Kies gets a new update too.

  2. how long does it take to reboot ? its been more than 30 min and it doesnt change from the “samsung” logo … please help

  3. installed this build (UK Download), everything seemed to go completely fine, keeping all my data.
    One exception…
    when I try to access wifi hotspot settings through: Settings > Wireless and networks > More settings.
    the screen goes blank for a few seconds followed by a message “unfortunately settings has stopped” sending me back to the home screen.
    anybody got any clues?

    1. Did you do some steps before installation:
      sync and back-up all files, then perform factory reset.
      Did you reconfigure APN settings, after installation.

    2. I backed up all data just in case, but didn’t perform a factory reset as it wasn’t required. my APN details must have transferred through correctly asI still can get a mobile data connection. the issue is that I can’t change or even view those settings, or those to set up hotspot tethering due to the crash whenever I select “more settings”

    3. Fixed now, factory reset did it, over an hour reinstalling everything and getting it all set up again though.

    1. No, don’t try it, You will ended up into soft-bricks, its a different Galaxy S3 variant for United States. This build is for International versions only.

  4. I flashed this ROM but the update checker says that there are no new updates available …what’s the deal??? There’s the 4.1.2 ROM out for months already

Comments are closed.