Verizon Galaxy Note 4 SM-N910V Stock Firmware

Download Verizon Samsung Galaxy Note 4 SM-N910V original stock firmware. These firmware files are for developers, advanced users, enthusiast, and alike. These are all full factory firmware files, it’s all untouched, unmodified and remained as official as it was. So you can rest assured that once you flashed one of these original firmware packages it will not knock down the KNOX counter of your device. It was all directly pulled from OTA updates and are all flashable firmware packaged that can be loaded onto Odin3_v3.10.6.

SM-N910V Verizon Galaxy Note 4 Firmware 

Android 6.0.1 Marshmallow Firmware Updates

Baseband version Android version Release date Stock
N910VVRS2CQF2 6.0.1 Marshmallow 2017 July (link)
N910VVRS2CQE1 6.0.1 Marshmallow 2017 June (link)
N910VVRS2CQD1 6.0.1 Marshmallow 2017 May (link)
N910VVRU2CQC1 6.0.1 Marshmallow 2017 March (link)
N910VVRS2CQB2 6.0.1 Marshmallow 2017 February (link)
N910VVRS2CQA1 6.0.1 Marshmallow 2017 February (link)
N910VVRS2CPL1 6.0.1 Marshmallow 2016 December (link)
N910VVRU2CPJ2 6.0.1 Marshmallow 2016 November (link)
N910VVRU2CPG2 6.0.1 Marshmallow 2016 October (link)
N910VVRU2CPF3 6.0.1 Marshmallow 2016 July (link)
N910VVRU2CPD1 6.0.1 Marshmallow 2016 June (link)

Android 5.1.1 Lollipop Firmware Updates

Baseband version Android version Release date Stock
N910VVRU2BPA1 5.1.1 Lollipop 2016 January (link)

Android 5.0.1 Lollipop Firmware Updates

Baseband version Android version Release date Stock
N910VVRU2BOG5 5.0.1 Lollipop 2015 August (link)
N910VVRU2BOF1 5.0.1 Lollipop 2015 July (link)
N910VVRU1BOAF 5.0.1 Lollipop 2015 April (link)

Android 4.4.4 KitKaT Firmware Updates

Baseband version Android version Release date Stock
N910VVRU1ANJ5 4.4.4 KitKat 2014 December (link)

About Rolling back from 5.0.1 Lollipop to 4.4.4 KitKat?

It is still possible to downgrade from Android 5.0.1 (N910VVRU1BOAF only) and returning back to Android 4.4.4 (N910VVRU1ANJ5). However, it is not always advisable on anyway as it might result into an undesirable outcome such as soft-bricks. Future updates might have a locked “bootloader” due the new security policy being imposed. Newer Lollipop updates even got a new Factory Reset Protection (FRP) feature so be aware on downgrading.

Important Note: These stock firmware packages are exclusively for Verizon Samsung Galaxy Note 4 with model SM-N910V only. You might have an unlocked Galaxy Note 4 which comes from other carrier, but it has unlocked and uses the Verizon SIM card. It will not work and might only result into soft-bricks. Noting that each firmware build version starts with “N910V” which actually should match to the phone’s model number. . Do not ever try use these firmware files in-case you don’t really exactly knows where and how to use it. Use of these firmware files is solely at your own risk! The list might be incomplete. If you couldn’t find what you’re looking for, then you are welcome to find it somewhere else. I’ve just put all up all together in one single page, as these files are very useful to fix yours as well as my Verizon Samsung Galaxy Note 4 SM-N910V phone if somehow we both messed-up from rooting and installing a modified firmware.

How and when a stock firmware can be use for?

· Fix a bricked phone either soft-bricked or hard-bricked but depends on phone status as long as the phone can reboot into download mode.
· 100% completely removed root and it cleans and wipes out all 3rd-party rouge apps inside the system tray.
· Restore back the phone from custom ROM to official firmware.
· Manually upgrade from 4.4.4 to 5.0.1 updates.
· Manually pull and dump system files such as Apps apk’s, Kernel, Boot image, Stock Recovery, CSC, Modem, Radio Interface Layer (RIL) etc. (Developers method)

Odin Flasher versions

Odin3_v3.10.6 or Odinv3.10.7 here

USB Driver versions

USB Driver (5.0, 5.1.1) All USB drivers can be found here
USB Driver (4.4)

How to Install Back Verizon Samsung Galaxy Note 4 SM-N910V to Full Stock Firmware

Install the USB driver

This process cannot be done if your Galaxy Note 4 is not recognized by the computer. So make sure to install the USB driver first.

Unzip the firmware file

Decompress the firmware file by using winzip,7zip,winrar.

Run and Configure Odin

Run Odin downloader Odin3_v3.10.6 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘RE-PARTITION’ is unchecked, only the ‘AUTO-REBOOT and ‘F.RESET TIME’ boxes has to check by default.install stock firmware galaxy note 4 edge

Reboot your Galaxy Note 4 N910V into Download Mode

To reboot the Galaxy Note 4 into download mode, you need to turn the power off first. Once it is completely turned off, just press and hold the Volume Down, Home and the Power/Lock button simultaneously. It should then prompt you into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”
Galaxy Note 4 edge download mode

Connect your Galaxy Note 4 into your Computer

As soon as you reboot the phone in download mode, simply connect the phone to your PC or laptop USB. In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin. Your COM port number might be different from mine. If you do not see a COM port number then there’s something missing or wrong. You may read again from the top of this post.

Load the Galaxy Note 4 N910V Stock Firmware package

The stock ROM is pack in single .tar.md5 file only. You just need to simply click on the AP button, then browse to the folder where the file you have previously extracted and then select and load it. Like for example on 5.1.1 Lollipop build: “N910VVRU1BOAF_N910VVZW1BOAF_HOME.tar.md5″

Start Installing the Stock Firmware

Once all set and ready, fire-up the “START” button in Odin to begin flashing the stock ROM. Do not ever interrupt the phone while already in flashing progress, like disconnecting the cable or turning off the device. Just wait until it completely finish.

Wait until Odin shows PASS!!

When the Stock ROM installation successfully completes, you will then see a word “PASS” in Odin. That simply indicates that the flashing was finished, and on the log box it says “All threads completed. (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s about time to disconnect it from your computer . Confirm if you successfully installed the stock firmware by going to Settings > About Phone > Firmware info.